Pinball info
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Today I worked on......
- Thread starter kevlar
- Start date
D
Deleted member 2463
How are you doing for power Dave? That’s becoming my limitation - everything powered up is close to 64amps!
Sent from my iPhone using Tapatalk Pro
Not all the pins are on at the same time @Neil McRae,
The cabin has two 3 ring mains- with RCDs
Actually I can’t remember what I put in for each one
The fuse in the house is 80AMP - so if the games are all on, I just live in hope that the wife doesn’t stick the Kettle on!
The cabin has two 3 ring mains- with RCDs
Actually I can’t remember what I put in for each one
The fuse in the house is 80AMP - so if the games are all on, I just live in hope that the wife doesn’t stick the Kettle on!
xianek
Site Supporter
Did you LED everything you could?
All my games LED’d
Will have to try out the “Alexa turn on (name)” that @Neil McRae had on his AIQLE unboxing thread.
Will have to try out the “Alexa turn on (name)” that @Neil McRae had on his AIQLE unboxing thread.
Last edited:
And.. it’s In..
tomorrow I’ll clear up the parts everywhere and start on the banners
tomorrow I’ll clear up the parts everywhere and start on the banners
The windows of buildings, beams from saucers and under the ships are cut out
D
Deleted member 2463
It’s actually a 63 amp breaker
A few bulbs in my meteor but that’s not the issue
22 pinball machines (all on Wi-fi plugs).
1 robotron
1 top end Dell server for streaming Woth 21” monitor
MacBook for comps
Wall mounted Touchscreen for comps
20 Wi-fi led halogens
Crazy lights
Two 2m ish neons
One half meter neon
2 50” TVs
1 projector
Sky q
Matrix hdmi switch
10kw air con unit
Then I’ve got my wfh setup, two laptops and sell ultra widescreen monitor.
It’s way more than it was designed for - I’m going to clamp the cable and get some temp readings on it - it’s supposed to be good for 100amps.
If I do Alexa turn in the pinball machines it now trips the main breaker!
Sent from my iPhone using Tapatalk Pro
That
Pushing it if you only have one incoming cable for house as well, check the main incoming fuse you might see black tar melting if you are
xianek
Site Supporter
Get rid of the AC 
Otherwise you'll burn the house down. And yes, I'm joking and exaggerating.
Otherwise you'll burn the house down. And yes, I'm joking and exaggerating.
I think I know what this is... [emoji16]
on the final home run today:
Now got to align all the switches, flippers etc. hopefully first game tomorrow [emoji2]
Sent from my iPhone using Tapatalk
Now got to align all the switches, flippers etc. hopefully first game tomorrow [emoji2]
Sent from my iPhone using Tapatalk
I don't think I've ever played Paragon but it has to be the best looking pin, both playfield and backglass.
Inline drops look pretty cool[emoji4]
Sent from my SM-G960F using Tapatalk
Inline drops look pretty cool[emoji4]
Sent from my SM-G960F using Tapatalk
thanks Andy. it was my grail pin. the one i played at university in 1980/81 in the halls of residence. that and a proper space invaders- (which i managed to clock!!)
Sent from my iPhone using Tapatalk
One more hole to drill.
xianek
Site Supporter
That's just crazy
I love a barbed wire baseball bat
It matches the trim so why not plus it was a key ring and I wasn’t having that attached to my keys
It matches the trim so why not plus it was a key ring and I wasn’t having that attached to my keys
I've spent way too much time over the last few days fannying around with this to get it just right....but now it is still got the rest of it to rebuild and then another just like it to strip, clean and rebuild 
still got the rest of it to rebuild and then another just like it to strip, clean and rebuild 
Some Templates to help Jim on his Arcade Cab build.
Just collected some tarted up bits from the Powder Coater. Trying out Prismatic Powders... Is it wrong to get a bit turned on by powder coat??
Various internal bits for my TZ in glorious Galaxy Grey 2 (basically anything metal that goes inside the cabinet and back box - too many to show here).
Also a sample of Lollipop Red in the background, that’s going to transform my HS2 one day.
Various internal bits for my TZ in glorious Galaxy Grey 2 (basically anything metal that goes inside the cabinet and back box - too many to show here).
Also a sample of Lollipop Red in the background, that’s going to transform my HS2 one day.
+1 @Dave Bishop - that's sexy as hell.
D
Deleted member 2463
