Today I worked on......

[Colywobbles]

Made my own Speaker Lights and inserts for my GOTG and also swapped sterns $2 specials for 5in JBLs like fitted to the later LEs.
Sat next to sterns factory ones in DP they Night & Day difference (pun intended)

 

[M4carp]

Looks great and looks like the speakers mount nice, flush and sealed so should sound great too

 

[Andydn]

Made my own Speaker Lights and inserts for my GOTG and also swapped sterns $2 specials for 5in JBLs like fitted to the later LEs.
Sat next to sterns factory ones in DP they Night & Day difference (pun intended)
View attachment 119359


View attachment 119361
View attachment 119360

Where’s did you buy the JBL’s col?


Sent from my iPhone using Tapatalk

 

[Deleted member 2463]

Andy - I've got a set of the JBL's you can have for a tenner mate.

 

[M4carp]

What a ball ache getting the MMR software update onto a mini SD card on a Mac, got there in the end without any dramas and fitted the chip without breaking any pins
Well worth it, happy with that
Speakers next!

 

[Carl85]

What a ball ache getting the MMR software update onto a mini SD card on a Mac[emoji30], got there in the end without any dramas and fitted the chip without breaking any pins[emoji23]
Well worth it, happy with that[emoji16]
Speakers next!

Looks great mate. Really does make a big difference. I have the xl on the way. Can’t wait to see what that looks like. Rgb kit is awesome if you haven’t already for it


Sent from my iPhone using Tapatalk

 

[M4carp]

Looks great mate. Really does make a big difference. I have the xl on the way. Can’t wait to see what that looks like. Rgb kit is awesome if you haven’t already for it


Sent from my iPhone using Tapatalk

Yes the XL display looks really nice, I have an original AFM so not going any further with this even though I would like too. Never say never though

 

[ronsplooter]

I've been working on my Stern Dracula on and off for the past few weeks. Everything has been stripped down, cleaned and bagged up ready to go back on. The playfield has had a first pass clean but now it needs it doing properly before I do the touch ups, waxing and reassembly

 

[replicas]

Looking forward to seeing/playing this beauty once you have worked your magic on it.
Great work so far buddy, keep up the good work.

 

[astyy]

The 128x16 Pin2DMD can support replacement animations at 128x32 - tested a scene in Hook today

 

[James]

After about 3 weeks, the JP2 post kit arrived. Replaced all the flipper mech underneath, one of the stops screws had sheared off and ruined the plate, rebuilt the flipper. Man I’m so ready to play this game z

 

[James]

Deadpool today, I now need to put that anti rattle doofer whats it back on JP2. So I’ll do that tomorrow, or maybe later tonight.

I was getting so many rejects on the scoop, because the scoop was broken. Read on Pinside it’s just a matter of time before it goes. Mine had. Rebuilt flipper mechs too. Not horrendous but at least I know it’s done. Gave it a wax with new wax @Neil McRae recommended.

 

[Andy_B]

Finally finished Volcano...almost [emoji1]

Sent from my SM-G960F using Tapatalk

 

[Deleted member 2463]

Put scorbitrons in all my games that they currently support...

https://sv.scorbit.io/viewer/leaderboards/20

 

[Gonzo]

A bit of an experiment.

I can't stand the bumper caps on the pro...

 

[Sako-TRG]

^^^^^ The amber....Prehistoric daddy long legs?

 

[Gonzo]

^^^^^ The amber....Prehistoric daddy long legs?

It's a test

I have 3x fly fishing mosquitoes but didn't want to waste them without trying to see if the resin works.

 

[Sako-TRG]

It's a test

I have 3x fly fishing mosquitoes but didn't want to waste them without trying to see if the resin works.

Ahh, didn't think they were home made mate, I think its a great idea! If you can get the insect to look more mosquito like it would be perfect.

 

[stumblor]

They look amazing @Gonzo .. Nice work!

 

[Gonzo]

Ahh, didn't think they were home made mate, I think its a great idea! If you can get the insect to look more mosquito like it would be perfect.
View attachment 120335

It's also slightly too yellow but I have some epoxy pigment in amber so I'll add some more drops.

I've also started replacing the 2D cut-outs in Deadpool and replacing them with proper figurines.

 

[Sako-TRG]

^^^^^ Yes, I'm a big fan of figures also, if you can get the authentic licensed ones!

 

[Gonzo]

^^^^^ Yes, I'm a big fan of figures also, if you can get the authentic licensed ones!

Any idea where from?

Those are Eaglemoss Marvel Classics

 

[Sako-TRG]

Any idea where from?

Those are Eaglemoss Marvel Classics

Sorry, i don't have DP, I was referring to my IMDN, which are the NECA ones i believe.

 

[ronsplooter]

Bottom of the playfield is back together and I finished all the touch ups on top. Not perfect but decent enough and looks a lot better. I've started rebuilding the top side now and it shouldn't be too long before I can start testing everything. I still need to look at the sound board and the backglass could do with some touch ups as well but it's getting there

 

[ronsplooter]

And it's pretty much done I still need to look at the sound board and decide if I'm going to touch up the backglass but the game is all back together and playing nicely. Not sure whether to work on Lucky Strike next or my Taito cocktail arcade cab.

 

[Moonraker]

I still need to look at the sound board and decide if I'm going to touch up the backglass

This one has been on ebay for a while, it might be worth making an offer...?
https://www.ebay.co.uk/itm/ATARI-Mi...057205?hash=item4220bc5db5:g:gGYAAOSwUPpcgtq6

 

[Colywobbles]

LOTR. Arwen protector
Got this in the post and knocked up a replacement. Came out well off a card template.

 

[Paul]

Not sure whether to work on Lucky Strike next or my Taito cocktail arcade cab.

OOh which cab Chris?? Space invaders??

 

[Andydn]

Over designed ramp to protect the Arwen plastic removed today.
It’s now protected by a Colywobbles special [emoji106] even has a cutaway so wire form sits at the right height. Now plays as it should from factory and Arwen is safe & sound.
I’d advise getting one of these now Col has the template (obviously fits on top of Arwen plastic rather than under it)



I bought 2 - one of them is fitted in that 2nd photo!


Sent from my iPhone using Tapatalk

 

[ronsplooter]

OOh which cab Chris?? Space invaders??

No mate, it’s a Phoenix but has a bootleg Pleiades board in it. My current plan is to wire it for Jamma, stick a spare 60 in 1 into it and then restrict that to the two way stick games so I can play SI, Galaga, Galaxian etc