What's new
By:
Pinball info

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Today I worked on......

Many thanks to @Wayne J for printing the stand/platform👍🏻
Just need to figure out a secure way of fixing to the machine now; any ideas? (The platform is hollow; looks like I'll need to fill it with something so it's flat underneath. Could then secure with command strips so not leave and permanant marks on the game)

1000022894.webp
1000022893.webp
1000023939.webp

Also got round to fixing a temporary UV light to the cab to light my posters (only one is on the wall; was just testing to see if it would light both the foil and standard ones I have - wanna get the Dirty Donny Met pinball version to go.next to Ktulu)

1000022886.webp

1000022885.webp
1000022877.webp
 
Marvello said:
@Colywobbles @J.C.Rox - I managed to get a cheap Millennium Falcon from eBay. I think I see how you mounted yours, but what type/gauge wire did you use? I guess it needs to be stiff enough to hold it up, but soft enough to shape?

View attachment 270788
Click to expand...
Sorry missed this, I just used a good old fashioned unbent paperclip! Worked fine!
 
Marvello said:
Ah OK, I did initially think of that but thought it would break when bent into a tight loop.

Just had a play around with one and looks like it will work, thanks! 👍
Click to expand...
Sorted 👍. Let's see if it will stay put.

Millennium Falcon on a paper clip is the new Tie Fighter on a spring. Actually, mounting it on a spring may be a better option 🤔.

IMG_20250205_202419.webp
 
Was having an issue where the middle inline drop target of the three was dropping without getting hit (often following a bank reset - my guess is vibration from a trough eject prior to ball launch.)
Anyway...have had a replacement set of drops for a while and last night I thought I'd bite the bullet and swap out the drop targets.
Removing the mech was easy (4 screws, 2 connectors), but once I'd removed the springs and e-clips I came across a problem; I couldn't remove the rods to gain access to the front two drops (screw wouldn't turn without the rod(s) turning with them.
Trying to grip the rod with pliers whilst turning the screw wasn't doing it ; still slipped (i need some pliers with rubber grips inside it think.
So at that point I turned to plan B; bending the middle drop trarget a bit so when up, it sits on the mech ledge it bit more securely/isn't so sensitive.
Well, looks like it worked:-)- touch wood, not had the issue reoccurr again yet!

Also, as I'm currently lusting after a Met Remaster, I thought I'd freshen things up a bit by finally getting round to trying out my fake/non Mirrored MOP translight the game - looks much better than I expected!
.1000024043.webp
1000024051.webp
1000024052.webp
 

Attachments

  • 1000024052.webp
    1000024052.webp
    321.3 KB · Views: 3
Last edited:
Mothra mod for GZ
1738966884281.webp

Then realised I couldn't get the screws into the holes to attach it to the machine, so I extended the supports to get access.

1738967026288.webp

But now you can see the supports :mad: - have worked out that if I lift the body up a bit, the holes will be accessible, so I can move it back again :clap: - job for Monday though. Then it'll need painting; good job I have some failures to practice on. I'll probably look at a way to move that flasher so it illuminates the model from the front.
 
Spent a bit of time tarting up my Star Wars.

Clean and Wax
Stainless Steel Shooter Rod, Snap-On Happy Sliders - Thanks @1stoppinball
Expression Speaker Lights, Titan Clear Rubbers & Blue Low Bounce Flipper Rubbers, New Balls, Speaker Upgrade - Thanks @David retro
Shaker Motor, Mirror Blades - Thanks @Silverpaolo
Insider Connected - Thanks @philpalmer
Invisi-glass - Thanks Neil
Millennium Falcon
Col's Plastic Protectors™ - Thanks @Colywobbles
Apron Cards - Thanks @johng2611
Lowered the outlanes
Fixed the Death Star which had become unbolted from the back board, didn't even realise until I took the glass off 🤓

Really glad I took a chance on this one and ignored the naysayers, loving it so far.

IMG_20250205_202456.webpIMG_20250205_203435.webpIMG_20250207_140348.webpIMG_20250208_094127.webp
IMG_20250208_125551.webp
 
Last edited:
Managed to get my powdercoating back for jaws so that went on, also spent the past few days struggling with rusted lamp holders, posts and dodgy hacks on mgow, still lots to do on this but pf is cleaned, rubbered, new posts, all lights are working and it's playing a game. Waiting on bits to redo the powers upper supply next then onto the sound. Crazy amount of bulbs in this game.
20250222_160000.webp
20250222_160042.webp
20250222_160241.webp
20250222_160357.webp
 

Attachments

  • 20250222_160049.webp
    20250222_160049.webp
    56.5 KB · Views: 1
Spent a bit of time dialling in Uncanny X-Men today, swapped the t-molding out for pink, to match and installed Col's flipper button protectors.

Love this game, great contrast with Godzilla
 

Attachments

  • 20250228_153913.webp
    20250228_153913.webp
    261.2 KB · Views: 30
Tank added today with red LED strip in the mouth £160 from Mezel or do it yourself for £20 (which I did)
Photo doesn’t pick out the red but looks great 🎉

IMG_2593.webp
 
You must log in or register to reply here.
Back
Top Bottom