Today I worked on......

[xianek]

I did some TZ tuning... I've used an LED strip that is blue and purple and UV. Because of the UV radiation, it is not possible to take a good picture of it. I hope this small amount of UV won't do any harm. In real life, this looks really good. I also added some extra lighting behind the title and the Bally logo. The title on the speaker panel is illuminated with a thin EL panel. The inverter is connected via a separate power supply to the mains voltage. Of course all of this wouldn't be possible with the original Speaker Panel and the original Translite. I am using my Backglass with custom sky and two black layers of ink, and my Speaker Panel which allows for illumination of the Title only. The COB LEDs are covered with 1 mm Silver HIPS which is white on the other side. This allows for much better light diffusion. There's a strip attached to the upper playfield glass trim (and hidden from the view) which illuminates the upper playfield only, but with the mirror foil on the sides and the glass above the light gets dispersed all over.

 

[replicas]

That does look good, are you putting this together as a kit for people to buy ?

 

[xianek]

That does look good, are you putting this together as a kit for people to buy ?

No, It would probably be too much work for me... I prefer to work on the computer... And do copy and paste

 

[Colywobbles]

Another day another big plastic set this time for the rare Rotation VIII

 

[Pick Holder]

Putting one of these things together... a TiltAudio board (a PinSound Alternative project)... interesting kit, also a very good test of my ham fisted soldering skills. Be interesting to find out if it works or goes up in Smoke!

Be interested on how you go as the guy who did this doesnt seem to reply to anyone asking for help. You do know that the board needs jumpers added (if you look on here for Tilt! audio you will se some of the issue).

 

[MadNat]

Be interested on how you go as the guy who did this doesnt seem to reply to anyone asking for help. You do know that the board needs jumpers added (if you look on here for Tilt! audio you will se some of the issue).

Steve has been very responsive in my experience so far Phil. He uses Slack - and has been excellent so far to be fair.

Finished the build - just been wiring up the speakers... good news is that the board boots... and getting some audio. However got some GI and switch problems now! So obviously messed up something. Just having a read of the schematics to look at fuses etc.

Will keep you posted.

 

[M4carp]

Stripped Robocop today and gave the dead Mylar a polish, looking much better. New star posts but the old ones were all in tact surprisingly.

 

[Pick Holder]

Steve has been very responsive in my experience so far Phil. He uses Slack - and has been excellent so far to be fair.

Finished the build - just been wiring up the speakers... good news is that the board boots... and getting some audio. However got some GI and switch problems now! So obviously messed up something. Just having a read of the schematics to look at fuses etc.

Will keep you posted.

I think if he replied on forums, he may sell more boards as if it works without issue it could be a pinsound killer.

TILT!Audio 1.25 with "red board" is out

I think he should hand it over to someone else or get someone else involved if he cannot commit particularly if you can still send money, it would be a shame to shut it down as it is such a good project. He has the PCB on easyeda.com open to public download so they are easy to modify and to get...

www.pinballinfo.com

 

[biglouieuk]

Today, I was Mr Tumble, for the first time.. Not sure if I am doing it right, used corn cob for a few hours and they certainly came up much much better than they were!

Send me parts, I wanna tumble stuff!!

 

[MadNat]

I think if he replied on forums, he may sell more boards as if it works without issue it could be a pinsound killer.

http://[URL]https://www.pinballinfo...audio-1-25-with-red-board-is-out.42799/page-5

[/URL]

At the moment I wouldn't describe it as a product Phil - its an electronics kit, in my opinion. It probably appeals to the more technical pinball enthusiasts - as it is at them moment (its now V3.0 - Black btw).

It needs to become a fully built product like PIN2DMD, Afterglow, etc for it to be sold in any real numbers. My hunch is that this may happen once he's figured out the full design and functionality.

 

[Paul]

He needs to stop adding crap to it every week and Come out with a fully working, no issues stable version..... Kit or not.

In the background work on the "next" version... And then release the new update 6-12 months later...

 

[Spandangler]

Today, I was Mr Tumble, for the first time.. Not sure if I am doing it right, used corn cob for a few hours and they certainly came up much much better than they were!

Send me parts, I wanna tumble stuff!!

View attachment 127725

ideally mate, you could leave it for about 3 days and then they’ll shine much more. That’s about my rule of thumb.

 

[MadNat]

Be interested on how you go as the guy who did this doesnt seem to reply to anyone asking for help. You do know that the board needs jumpers added (if you look on here for Tilt! audio you will se some of the issue).

Switches and GI was a dodgy ribbon connection.

Got it running. Playing with audio packs now. No smoke... yet! [emoji2]

 

[MadNat]

He needs to stop adding crap to it every week and Come out with a fully working, no issues stable version..... Kit or not.

In the background work on the "next" version... And then release the new update 6-12 months later...

I’d agree with that [mention]Paul [/mention] - seems to be updates coming fast and furious. To be fair I’ve managed to get this one up and running fairly easily... need to see how it goes - I’m sure there’ll be some dodgy connections somewhere at least.

 

[Colywobbles]

Some more shooter plates for LOTR, AIQ and STrek.

 

[Vimtoman]

Just completed a working proto Stern Spike & Spike 2 led shooter gauge.
Has various effects and options to change.
Briightness and colour adjustments.
Clicks into metal shooter gauge mount.
Requires white disc to be added onto the shooter rod.
Cable plugs into 12v supply in backbox and one connection on the shooter lane switch.

 

[James]

Just completed a working proto Stern Spike & Spike 2 led shooter gauge.
Has various effects and options to change.
Briightness and colour adjustments.
Clicks into metal shooter gauge mount.
Requires white disc to be added onto the shooter rod.
Cable plugs into 12v supply in backbox and one connection on the shooter lane switch.

That’s very clever

 

[Vimtoman]

That’s very clever

Its taken a while to do and now finally completed.
Have sent one to @Colywobbles to test out.

 

[Dave Playman]

Evening all. Currently stripping Fish Tales for a clean, wax, and re-rubber. Also doing flipper rebuild, new VUK parts due to operator hack on the plunger. Hoping to get this back in action over Christmas break

 

[M4carp]

Just completed a working proto Stern Spike & Spike 2 led shooter gauge.
Has various effects and options to change.
Briightness and colour adjustments.
Clicks into metal shooter gauge mount.
Requires white disc to be added onto the shooter rod.
Cable plugs into 12v supply in backbox and one connection on the shooter lane switch.

Another great mod, that’s very clever Trevor!

 

[M4carp]

Got Ed209 back to its glory on the new plastic, bit more cutting/lining up and stateside parts to come and it will be running.
Cab can get done in the summer

 

[Matrixnetuk]

Shooter Plate installed thanks Col and of course a little something for my tree lol

 

[crsedgar]

Finally reassembled BSD after having it stripped for a couple of months, fitting; cliffy's protectors, @Colywobbles protectors, Morpheus' coffin cover mod, Pinball Bazaar's (@James) red rubber kit and @RudeDogg1 's awesome painted models.

 

[Dave Playman]

Finally reassembled BSD after having it stripped for a couple of months, fitting; cliffy's protectors, @Colywobbles protectors, Morpheus' coffin cover mod, Pinball Bazaar's (@James) red rubber kit and @RudeDogg1 's awesome painted models.

Looks awesome man! Good job

 

[crsedgar]

Looks awesome man! Good job

Cheers Dave

 

[MajesticPinball]

Finally reassembled BSD after having it stripped for a couple of months, fitting; cliffy's protectors, @Colywobbles protectors, Morpheus' coffin cover mod, Pinball Bazaar's (@James) red rubber kit and @RudeDogg1 's awesome painted models.

Looks beautiful, excellent work dude

 

[crsedgar]

Looks beautiful, excellent work dude

Thanks @MajesticPinball

 

[James]

Finally reassembled BSD after having it stripped for a couple of months, fitting; cliffy's protectors, @Colywobbles protectors, Morpheus' coffin cover mod, Pinball Bazaar's (@James) red rubber kit and @RudeDogg1 's awesome painted models.

Looking good @crsedgar - how have you found the Perfect Play rubbers, they look really good on BSD I must say, I need to add the kit to the website, but kits take a while to add as they are a bundled product.

 

[crsedgar]

Looking good @crsedgar - how have you found the Perfect Play rubbers, they look really good on BSD I must say, I need to add the kit to the website, but kits take a while to add as they are a bundled product.

I haven't played many games @James due to a sticky coffin ramp but so far they work well, a joy to install compared to traditional rubbers.

 

[stumblor]

I've been asked to put together a lighting mod for Elvira HOH - a shaker motor triggered edge lit acrylic 'lightning strike' for the house. Made some good progress with it today.