Pinball info
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Team TNA - The UK's Total Nuclear Annihilation Pinball Club
- Thread starter RetroHeed
- Start date
Yeah that must be a year now owning the game, still awesome.I think it is ? well for me it is 1 year now
Managed to totally wear out 2 coils stops
Treated myself to the TNA glass cover from pinball life
How is everyone else fairing ?
Apart from changing the flipper rubbers and I don't think I have any other major issues, I will need to check the coils stops at some point though.
Oh wow... this topper is really cool..
Just see it on Pinside,
https://pinside.com/pinball/forum/t...ilation-cluball-welcome/page/240#post-8197737
Just see it on Pinside,
https://pinside.com/pinball/forum/t...ilation-cluball-welcome/page/240#post-8197737
Attachments
You must have all the luck then with no issues - Glad to hear of a problem free machine
Mine has been performing really well and I’m achieving reactor 3 most games.
I’ve been in contact with the topper guy - They are a few hundred $$ so i’m on the fence atm. Might treat myself later in the year - Maybe when the summer is over….
Mine has been performing really well and I’m achieving reactor 3 most games.
I’ve been in contact with the topper guy - They are a few hundred $$ so i’m on the fence atm. Might treat myself later in the year - Maybe when the summer is over….
Added Danesi Designs TNA Merchandise link to Thread front page.
https://danesidesigns.com/collections/total-nuclear-annihilation-pinball
https://danesidesigns.com/collections/total-nuclear-annihilation-pinball
Fubar
Registered
I've had the game for over a month now and it's incredibly annoying and addictive.
It's not my favourite game but it's so different that it's worth keeping around for something different in the collection. Brilliant for quick games and really good to play doubles with my son both against each other and in co-op.
It's not my favourite game but it's so different that it's worth keeping around for something different in the collection. Brilliant for quick games and really good to play doubles with my son both against each other and in co-op.
<iframe width="560" height="315" src="
" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" referrerpolicy="strict-origin-when-cross-origin" allowfullscreen></iframe>
Need to nail these live and dead catches.... one day
Need to nail these live and dead catches.... one day
Last edited:
Found sometimes with these style buttons they can be broken down into pieces , cleaned in soapy water and reassembled
or just buy a new button.. Likely finger grease and dirt - Especially if sticky fingers have been using them
or just buy a new button.. Likely finger grease and dirt - Especially if sticky fingers have been using them
A couple of people have had this, me also. Possibly likely just need a good clean.
I cleaned mine up and it happened again so I ended up ordering replacement buttons (purple) and never had one sticking again as yet.
https://retroarcadespecialists.co.u...1-18-shaft---with-spring/v/CBN-FLP-BTT-PQ-PRP
I cleaned mine up and it happened again so I ended up ordering replacement buttons (purple) and never had one sticking again as yet.
https://retroarcadespecialists.co.u...1-18-shaft---with-spring/v/CBN-FLP-BTT-PQ-PRP
Jib
Site Supporter
Is the switch blade just pushed further into the cab on the right so less resistance?
Use a leaf switch adjuster and bend the arm that the button pushes against the button. It'll make it stiffer.
Or do opposite for less stiff.
I am very particular about this so always adjusting my flipper buttons to get them firm and consistent
Or do opposite for less stiff.
I am very particular about this so always adjusting my flipper buttons to get them firm and consistent
So… after some time working with @Vimtoman we now have the shooter lane LED system available for TNA.
Photos of install and an awful single ball game of operation from me
It’s very very easy to install. Just the soldering or a couple connection may not be great for everyone but if i can do it so can you
Photos of install and an awful single ball game of operation from me
It’s very very easy to install. Just the soldering or a couple connection may not be great for everyone but if i can do it so can you
Attachments
Thanks for the TNA's aprons dimensions and testing Rob.So… after some time working with @Vimtoman we now have the shooter lane LED system available for TNA.
Photos of install and an awful single ball game of operation from me
It’s very very easy to install. Just the soldering or a couple connection may not be great for everyone but if i can do it so can you
Fubar
Registered
Looks like there'll be a total of 3 TNAs at Pinfest, how cool is that?! 
@RetroHeed - are you there this year ?
Last edited:
Thanks to those who took their TNAs to Pinfest, Enjoyed several multiplayer games , especially one with @RetroHeed
Of all the machines I heard 2 games through them all - TNA / Walkingdead
Was able to collect this whilst there.
Of all the machines I heard 2 games through them all - TNA / Walkingdead
Was able to collect this whilst there.
Attachments
Good catching up mate and having a game on TNA, was maybe just a bit late in the day before we had to head home unfortunately, my excuse for playing crap but thats the normal haha.
Very nice TNA dust cover you got
My TNA has a dowel that keeps working loose on the upper flipper. I’ve ordered the Spooky flipper rebuild kit from PinballLife, in the hope that works, as I’ve tapped/hammered the dowel back in twice already.
Wondered if anyone else had this problem and what the solution was?
Wondered if anyone else had this problem and what the solution was?