What's new
By:
Pinball info

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Finally, Pulp Fiction

Yeah, the edge is kinda rounded on Pinguard
Think there are some replicas kicking around.
My GnR uses factory felt between the leg and OEM bracket, that’s been absolutely fine too with no movement.

Manufacturer states not to put on freshly decaled cabs , screen print is fine.
Def wouldn’t put them on unless there was an existing metal bracket, get longer leg bolts and nylon washers
 
Was the PF artwork silkscreened printed directly to the cabinets? I thought I saw a video of them applying decals at the factory?
 
Alpha1 said:
I've heard the metal leg protectors are really crap and it's recommended to swap for thicker ones. I've seen this on a YouTube video where the legs touch the cabinet. Are people changing them out?
Click to expand...
I've had look at mine and unless you're throwing the Pin around the room I can't see why you'd need to change them, they provide a clear gap between the leg and cabinet.
 
Last edited:
I've always heard plastic protectors are for printed/painted cabs and metal ones for decalledas the plastic ones can wrinkle the decals.

I've had a couple of different brand plastic ones and not sure if it's the legs on the cabs but some protrude and some sit inside the leg an don't protrude, if they are hidden behind the legs you could always trim the decal around the protector to stop it wrinkling them.
 
Marvello said:
Going off Pinside where you have said 'Right flipper twice' it should only be once.

L, L, R, L, L, L, L, L, R, L, L, L, L, L, L, L, R

Left flipper 2 times, Right flipper once, Left flipper 5 times, Right flipper once, Left flipper 7 times, Right flipper once

Flipper codes never have two right flipper presses
Click to expand...
Just done it, this is the real reason I spent £8k+!
 
ronsplooter said:
Mine was delivered this morning but I won't get chance to unbox it until the weekend....it's going to be a long Friday :eek:

View attachment 270251
Click to expand...
I had to do the same, I also waited a few hours after bringing it in from a cold garage before powering it up.

I figured I'd waited 11 months so a little extra time wouldn't matter.
 
Going to turn mine down too.

From gameplay streams it seems the flipper power is way to high on default, especially for a game with no ramps to make.
 
Mooseman said:
A certain deleted member lost his keys inside the game and it shorted 3 boards. Ouch.
Click to expand...
That was actually Metallica, and I was playing it when it suddenly couldn't keep track of balls. The keys somehow jammed in the opto trough board and took out the trough board and a few light boards ( they're are all connected to node board 8 via a serial connection ).

Glad to see so many getting their Pulp Fictions. I'll gladly trade my Uncanny X-Men for 1 when you get bored 🙂.
 
You must log in or register to reply here.
Back
Top Bottom