Unboxing party? What a haul
Pinball info
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Finally, Pulp Fiction
- Thread starter Gary Flower
- Start date
Mate!!! That’s some delivery!
Neil's LE unboxing at 20:00 - https://m.twitch.tv/NeilMcRae/home
Will2.0
Registered
Couple landed today Lee Riley sent me pics of his arrival this afternoon.
Will2.0
Registered
Congratulations Lee on the first one in the UK 
Enjoy my man
Enjoy my man
That topper...Pulp le has entered the building
Ant-H
Site Supporter
None, its probably already left the buildingLooks great Lee. What room is it going in mate?
, could not resist sorry
Is it worth the wait ?
Yeah its a great game, i have played it at quite a few expos already so i knew what i was getting into.
So are you selling these?
Have you put a playfield protector on your game?
yes to both - After all the pinside posts on playfield condition for me it was a no brainer - Modification needed on protector where magnet is
Magnet burn widely reported / once done raise magnet inline with protector
Attachments
Also reccomend a set of Plastics from @Colywobbles
The ball will catapult itself from each sling shot across the game and if you have mirrors will put dings in them. Appears the gap between the rubber and the OEM plastic is too great allowing for the ball to push the rubber down and whoosh, off it flies
At present i’ve put the spacer washers ontop of the OEM plastic to reduce the distance whilst awaiting a set and the launching has diminished massively
Also happens right side of Pawn shop
Plastics from ULEK store on pinside are pants fyi…
The ball will catapult itself from each sling shot across the game and if you have mirrors will put dings in them. Appears the gap between the rubber and the OEM plastic is too great allowing for the ball to push the rubber down and whoosh, off it flies
At present i’ve put the spacer washers ontop of the OEM plastic to reduce the distance whilst awaiting a set and the launching has diminished massively
Also happens right side of Pawn shop
Plastics from ULEK store on pinside are pants fyi…
Attachments
Planning on a playfield protector for mine too, need to pick up one of those stepped drill bits.
Looking at the pics I'm a little confused what the washers above the plastics are doing, are they protecting the edges, or are they stiffening the plastic and stopping the ball pushing between the plastic and rubber?
What colours are people thinking for Cols plastics? normally go with a colour theme from the game, but feel red or blue would be a bit OTT
Looking at the pics I'm a little confused what the washers above the plastics are doing, are they protecting the edges, or are they stiffening the plastic and stopping the ball pushing between the plastic and rubber?
What colours are people thinking for Cols plastics? normally go with a colour theme from the game, but feel red or blue would be a bit OTT
Will be clear for me. Strong colours overpower the colours in the plastics. Tried orange in my Lebowski and took them off straight away. Same issue with red on Walking Dead.
Humm, defo don't want to wash out the colours on the plastics, do like the way the exposed edge of the protector almost seems to glow tho, wonder if a light yellow might work? would match the playfield colour on the bottom third
protect the edges , didn’t really need to put them but figured better there than in the drawer
Yes, made them for me but it took along time and happy to assist other owners if they wish
Damage below from a USA owner to illustrate what can happen
Attachments
Ah I see, have you lowered the coil power at all? seems on stream the flipper power is really high, especially for a game with no ramps.
Sorry for all the questions, could ask on Pinside..... but too scared to get shouted at
To be fair on PF, I don't think the wear is any worse than old B/W games with unprotected saucers and scoops, metal ball vs wood, the balls gonna win.
But makes sense to protect as much as possible when the game is brand new.
Last edited:
New PFLE owners….
Did any of you have to remove the head unit to get through standard size doors?
Cheers
Did any of you have to remove the head unit to get through standard size doors?
Cheers
