| | |
Printing Technology | Fused Deposition Modeling | |
Body | Build Volume (W*D*H) | Single Nozzle Printing: 325*320*325 mm³
Dual Nozzle Printing: 300*320*325 mm³
Total Volume for Two Nozzles: 350*320*325 mm³ |
Chassis | Aluminum and Steel | |
Outer Frame | Plastic and Glass | |
Physical Dimensions | Physical Dimensions | 492*514*626 mm³ |
Net Weight | 31 kg | |
Toolhead | Hotend | All Metal |
Extruder Gear | Hardened Steel | |
Nozzle | Hardened Steel | |
Max Nozzle Temperature | 350 °C | |
Included Nozzle Diameter | 0.4 mm | |
Supported Nozzle Diameter | 0.2 mm, 0.4 mm, 0.6 mm, 0.8 mm | |
Filament Cutter | Built-in | |
Filament Diameter | 1.75 mm | |
Extruder Motor | Bambu Lab High-precision Permanent Magnet Synchronous Motor | |
Heatbed | Build Plate Material | Flexible Steel Plate |
Included Build Plate Type | Textured PEI Plate | |
Supported Build Plate Type | Textured PEI plate, Smooth PEI Plate | |
Max Heatbed Temperature | 120 ℃ | |
Speed | Max Speed of Toolhead | 1000 mm/s |
Max Acceleration of Toolhead | 20,000 mm/s² | |
Max Flow for Hotend
(Standard Flow Hotend) | 40 mm³/s(Test parameters: 250 mm round model
with a single outer wall;
Bambu Lab ABS; 280 °C printing temperature) | |
Chamber Temperatur
Control | Active Chamber Heating | Supported |
Max Temperature | 65 °C | |
Air Purificatio | Pre-filter Grade | G3 |
HEPA Filter Grade | H12 | |
Activated Carbon Filter Type | Granulated Coconut Shell | |
VOC Filtration | Superior | |
Particulate Matter Filtration | Supported | |
Cooling | Part Cooling Fan | Closed Loop Control |
Cooling Fan for Hotend | Closed Loop Control | |
Main Control Board Fan | Closed Loop Control | |
Chamber Exhaust Fan | Closed Loop Control | |
Chamber Heat Circulation Fan | Closed Loop Control | |
Auxiliary Part Cooling Fan | Closed Loop Control | |
Supported Filament Type | PLA, PETG, TPU, PVA, BVOH | Optimal |
ABS, ASA, PC, PA, PET | Superior | |
Carbon/Glass Fiber Reinforced PLA,
PETG, PA, PET, PC, ABS,ASA | Superior | |
PPA-CF/GF, PPS, PPS-CF/GF | Ideal | |
Sensor | Live View Camera | Built-in; 1920*1080 |
Nozzle Camera | Built-in; 1920*1080 | |
BirdsEye Camera | Built-in; 3264*2448 | |
Toolhead Camera | Built-in; 1920*1080 | |
Door Sensor | Supported | |
Filament Run Out Sensor | Supported | |
Filament Tangle Sensor | Supported | |
Filament Odometry | Supported with AMS | |
Power Loss Recovery | Supported | |
Electrical Requirements | Voltage | 100-120 VAC / 200-240 VAC, 50/60 Hz |
Max Power* | 2200 W@220 V / 1320 W@110 V | |
Average Power | 1050 W@220 V / 1050 W@110 V | |
Electronics | Touchscreen | 5-inch 720*1280 Touchscreen |
Storage | Built-in 8 GB EMMC and USB Port | |
Control Interface | Touchscreen, mobile App, PC App | |
Motion Controller | Dual-core Cortex-M4 and Single-core Cortex-M7 | |
Application Processor | Quad-core 1.5 GHz ARM A7 | |
Neural Processing Unit | 2 TOPS | |
Software | Slicer | Bambu Studio
Supports third-party slicers which export standard G-code,
such as Super Slicer, PrusaSlicer and Cura,
but certain advanced features may not be supported. |
Supported Operating System | MacOS, Windows | |
Network Control | Ethernet | Not Available |
Wireless Network | Wi-Fi | |
Network Kill Switch | Not Available | |
Removable Network Module | Not Available | |
802.1X Network Access Control | Not Available | |
Wi-Fi | Operating Frequency | 2412-2472 MHz, 5150-5850 MHz (FCC/CE)
2400-2483.5 MHz,5150-5850 MHz (SRRC) |
Wi-Fi Transmitter Power (EIRP) | 2.4 GHz: <23 dBm (FCC); <20 dBm (CE/SRRC/MIC)
5 GHz Band1/2: <23 dBm (FCC/CE/SRRC/MIC)
5 GHz Band3: <30 dBm (CE); <24 dBm (FCC)
5 GHz Band4: <23 dBm (FCC/SRRC); <14 dBm (CE) | |
Wi-Fi Protocol | IEEE 802.11 a/b/g/n | |
10W Laser Module | Laser Type | Semiconductor Laser |
Laser Wavelength | Engraving Laser: 455 nm ± 5 nm Blue Light
Height Measuring Laser: 850 nm ± 5 nm Infrared Light | |
Laser Power | 10 W ± 1 W | |
Laser Spot Dimension | 0.03 mm * 0.14 mm | |
Working Temperature | 0 °C–35 °C | |
Max Engraving Speed | 400 mm/s | |
Max Cutting Thickness | 5 mm (Basswood Plywood) | |
Laser Safety Class for Laser Module | Class 4 | |
Overall Laser Safety Class* | Class 1 | |
Engraving Area | 310 mm * 270 mm | |
Processing Height Range | 0 mm-280 mm | |
XY Positioning Method | Visual Positioning | |
XY Positioning Accuracy | < 0.3 mm | |
Z Height Measuring Method | Micro Lidar | |
Z Height Measuring Accuracy | ± 0.1 mm | |
Flame Detection | Supported | |
Temperature Detection | Supported | |
Door Sensor | Supported | |
Laser Module Installation Detection | Supported | |
Engraving Timelapse | Supported | |
Safety Key | Included | |
Air Pump | Built-in; 30 kPa, 30 L/min | |
Ventilation Pipe Adapter Outer Diameter | 100 mm | |
Supported Material Type | Wood, rubber, metal sheet, lether, dark acrylic, stone, and more | |
40W Laser Module | Laser Type | Semiconductor Laser |
Laser Wavelength | Engraving Laser: 455 nm ± 5 nm Blue Light
Height Measuring Laser: 850 nm ± 5 nm Infrared Light | |
Laser Power | 40 W ± 2 W | |
Laser Spot Dimension | 0.14 mm * 0.2 mm | |
Working Temperature | 0 ℃–35 ℃ | |
Max Engraving Speed | 1000 mm/s | |
Max Cutting Thickness | 15 mm (Basswood Plywood) | |
Laser Safety Class for Laser Module | Class 4 | |
Overall Laser Safety Class* | Class 1 | |
Engraving Area | 310 mm * 250 mm | |
Processing Height Range | 0 mm–265 mm | |
XY Positioning Method | Visual Positioning | |
XY Positioning Accuracy | < 0.3 mm | |
Z Height Measuring Method | Micro Lidar | |
Z Height Measuring Accuracy | ± 0.1 mm | |
Flame Detection | Supported | |
Temperature Detection | Supported | |
Door Sensor | Supported | |
Laser Module Installation Detection | Supported | |
Engraving Timelapse | Supported | |
Safety Key | Included | |
Air Pump | Built-in; 30 kPa, 30 L/min | |
Ventilation Pipe Adapter Outer Diameter | 100 mm | |
Supported Material Type | Wood, rubber, metal sheet, lether, dark acrylic, stone, and more | |
Cutting Module | Cutting Area | 300*285 mm² |
Drawing Area | 300*255 mm² | |
Supported Pen Diameter | 10.5 mm-12.5 mm | |
Cutting Mat Type | LightGrip and StrongGrip Cutting Mats | |
Blade Type | 45°*0.35 mm | |
Blade Pressure Range | 50 gf-600 gf | |
Max Cutting Thickness | 0.5 mm | |
Blade and Pen Recognition | Supported | |
Cutting Mat Type Detection | Supported | |
Supported Image Type | Bitmap and Vector Images | |
Supported Material Type | Paper, vinyl, leather, and more | |