Pinball info
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
“GTF” Galactic Tank Owners Parlour
- Thread starter SeikoKid
- Start date
The 3D print quality just for me. It needs a sculptured model imo.
Last edited:
oh right, yeah that’s a common complaint. I thought it would bother me but it hasent
Will2.0
Registered
I am tempted …
Congratulations
Can we have an unboxing.. any photos ?
Not had the chance to unbox it today
Hopefully tomorrow and will post some photos as soon as I do
I have the top cannon but have not got the side tank tracks yet, they are coming separately, probably via Martin and may not be here for a while.
You bought the full bifta. I thought that was for the super LE only..
Of course, gotta have the tank cabinet
The LE has the topper and side tank tracks, knocker, shaker, invisible glass and coloured armour.The SLE also came with some extras (signed apron, 3D backglass, posters, a pint glass, different coloured armour etc).
Galactic Tank Force - American Pinball
An out-of-this-world adventure as American Pinball unleashes their latest masterpiece. Galactic Tank Force! With live actors, cutting-edge graphics, and gripping gameplay, these cosmic exploits guarantee non-stop laughs, thrills, and excitement for pinball fans everywhere!
www.american-pinball.com
Attachments
New members check list
* Tank target mod is already installed
* Check pop bumpers are all working and adjust switches as not that sensitive
* Install latest code - https://www.american-pinball.com/support/updates/ - make sure you format to Exfat
* Order in ball lock save mod if not fitted ( i doubt it will be ) I have 1 spare as they sent 2.
* Adjust left side wireform by bending up lower right side a touch to stop ball falling off
* Install magnet mylar on tank and AIR magnets - https://pinparts.co.uk/pinball-parts/ols/products/mylar-magnet-protector
* Adjust magnet so it is flush with playfield - tighten it up as it will come loose
Anything else I remember I’ll update
* Tank target mod is already installed
* Check pop bumpers are all working and adjust switches as not that sensitive
* Install latest code - https://www.american-pinball.com/support/updates/ - make sure you format to Exfat
* Order in ball lock save mod if not fitted ( i doubt it will be ) I have 1 spare as they sent 2.
* Adjust left side wireform by bending up lower right side a touch to stop ball falling off
* Install magnet mylar on tank and AIR magnets - https://pinparts.co.uk/pinball-parts/ols/products/mylar-magnet-protector
* Adjust magnet so it is flush with playfield - tighten it up as it will come loose
Anything else I remember I’ll update
Last edited:
Thanks for this @SeikoKid really helpful to know for a new owner
I haven't had the chance to unbox yet and may not get a chance to until the weekend
Is there an easy way to know if the tank mod is fitted??
What's the ball lock save mod?? If I need one I take it it's just an email to American Pinball?
I have a exfat formatted USB stick with the software on ready to go
Just followed your link to order the mylar but they are out of stock
Thanks again for the super helpful post
