For Sale Retro Arcade Specialists Pinball parts and mods for sale

[dave]

I’ll look to get some in think there’s a variety of different types and that but I can look at getting them in

I think the ones they have on pinball Life cover a lot of games you just pick the coil you need, the leaf switches are separate though but you probably plenty of those.

 

[David retro]

I think the ones they have on pinball Life cover a lot of games you just pick the coil you need, the leaf switches are separate though but you probably plenty of those.

ill look to get a range of sling Assembly s over any other parts you may need drop me a message and ill get them sorted

 

[replicas]

So I literally threw the collection I had in the bin as no one should be using them imo. The only time I'd use them is if they were already there and the damage had been done.

That’s exactly what they are designed for. Not everyone will redecal there cabinet because they have wrinkle damage around the legs. If you have an original cabinet in great condition and wrinkles around the legs they are the perfect thing to hide the damage.

 

[cmrl9]

Hi @David retro

Could you get for speaker mount bolts for spike 2 cabinet for this speaker I purchased?

Pinsound Subwoofer - PS-SW8

The listing did say mounting kit not included.

 

[David retro]

Hi @David retro

Could you get for speaker mount bolts for spike 2 cabinet for this speaker I purchased?

Pinsound Subwoofer - PS-SW8

The listing did say mounting kit not included.

Drop me a message and I’ll get this sorted for you
Many thanks
David

 

[cmrl9]

Drop me a message and I’ll get this sorted for you
Many thanks
David

Thanks

 

[David retro]

We have a couple of these stern volume controls left in stock

External Volume Controller for Stern Machines

External Volume Controller for Stern Machines Please note: This kit WILL NOT WORK on non-USA games! Only domestic (USA) machines have the six-pin connector required to install this unit. This mod enables you to adjust the volume on most Stern SAM, SPIKE, & SPIKE 2 system pinball machines...

retroarcadespecialists.co.uk

 

[David retro]

Tons of new bits have been arriving this week
Over 200 new items to be added to the website with more still coming by the day

Let us know what you’d like to see and we will get it in stock
We always appreciate suggestions and improvements to our services and products
Lots of new and exciting things to come before Christmas

 

[David retro]

For me i love to be able to get better deals for our customers so we are constantly monitoring prices and quality from suppliers and when we get the same great products at a lower price we pass that saving onto the customer for a better customer experience and the same quality products
Today's product is the super handy long reach fuse puller

Long Reach Fuse Puller

Long Reach Fuse Puller

retroarcadespecialists.co.uk

now 28% cheaper and the same great product so why not add one onto your next order to get them stubborn fuses out with ease

 

[David retro]

Fan kits back in stock

Stern SPIKE System Plug-N-Play Quiet Fan Kit - 500W

Stern SPIKE System Plug-N-Play Quiet Fan Kit - 500W See secondary picture for compatibility list. Anyone that has a Spike pinball machine knows that the fan is WAY TOO LOUD and really annoying, especially in a home environment. This fan kit is designed to replace the stock 34.6dB fan in Stern...

retroarcadespecialists.co.uk

 

[lukewells]

Got my last order super fast. Big thanks David

 

[David retro]

Got my last order super fast. Big thanks David

Many Thanks for your order and support

 

[Sertx]

Hi David,
Can I have a quiet fan added to my topper order please. Thanks!

 

[David retro]

Hi David,
Can I have a quiet fan added to my topper order please. Thanks!

Sure thing ill add that in

 

[David retro]

Turner Pinball

Stockists of New and Workshopped Pinball Machines Pinball Repair and modifications Arcade games Pinball Parts Pinball Hire

retroarcadespecialists.co.uk

Turner Pinballs Ninja Eclipse now added to website very limited stock

 

[David retro]

First boxes of Polaris balls arrived Friday
So they are back in stock

POLARIS™ Carbon Steel Pinball

POLARIS™ Carbon Steel Pinball Non-magnetic carbon steel pinball measuring 1-1/16″, 2.9oz. Please read detailed description below for important information. When the magnetic features in your machines demand a different ball. NOTE: Polaris™ carbon pinballs, no matter how much they are...

retroarcadespecialists.co.uk

All back orders for Polaris were dispatched yesterday on tracked 24 so should be arriving today with most places

For all things pinball get In Touch today

 

[lukewells]

My Polaris order arrived today

 

[David retro]

My Polaris order arrived today

Many thanks for your order and support

 

[David retro]

Mini update
Bunch of new items added to the website today
Including sling shot assembly’s , new shooter rods and coils
We’ve got around another 200 new items landed to get on and about 100 more coming in the next week

Had a few restocks land today that have been done such as comet ,Titan and pinsound

Check out the new products here

https://retroarcadespecialists.co.u...ducts?page=1&sortOption=descend_by_created_at

If anyone has asked for specific parts please drop me a pm so I can add them items faster for you or to check on there status in shipping

We’ve been super busy with lots of games going to customers all around the Uk and the world
Attached a couple photos

I’d also like to thank the growing customer base we have I appreciate each customer a huge amount because with out you we wouldn't be able to grow to where we are today and we’ve got big plans for the next 6 months and beyond so stay tuned for that

We are currently in the middle of renovating our offices to expand our operations and capacity

And as always get in touch for all your pinball needs

We’re having a huge clearout this November -projects, prototypes and parts joblots seen something you fancy make us an offer

 

[David retro]

More items now at a better price
Same great quality

Today we’ve now got a reduction on
Shooter rods

Ball Shooter (Plunger) Rod - Black Knob

Ball Shooter (Plunger) Rod - Black Knob Williams/Bally #20-9253-7.

retroarcadespecialists.co.uk

And Williams /bally coil stops

Williams/Bally Flipper Coil Stop A-12390

Williams/Bally Flipper Coil Stop A-12390 Used on all Williams/Bally games from 08/1993 to 06/1999. Williams/Bally reference #A-12390. Jersey Jack Pinball reference #JJP-10-007001-00, JJP-10-7001-00, & 10-007001-00. American Pinball reference #MTL0073-00.

retroarcadespecialists.co.uk

 

[David retro]

More new Products added
lots of new gottlieb bits arrived so will be getting them added as well

All Products

Stockists of New and Workshopped Pinball Machines Pinball Repair and modifications Arcade games Pinball Parts Pinball Hire

retroarcadespecialists.co.uk

if theres anything youd like to see us stock please reach out we will do our best to make it happen

ill be adding a few clearance items today hopefully as well

 

[lukewells]

Glass trim kits to fit CPR reproduction backglass would be something I need to find. (Classic Williams, Bally and Stern)

 

[Mozie]

Don't they all come with trim kit and liftbar? Last one I got did

 

[JAG555]

Glass trim kits to fit CPR reproduction backglass would be something I need to find. (Classic Williams, Bally and Stern)

Yes same! How do you keep them in place by the way? Tape?

 

[JAG555]

@David retro any luck with the Stern signs yet?

 

[lukewells]

Don't they all come with trim kit and liftbar? Last one I got did

It is now an optional extra to buy the kits, but it was not an option for all the ones I have bought over the years, up to and including earlier this year

 

[lukewells]

Yes same! How do you keep them in place by the way? Tape?

Grip tape / felt tape (assuming you have the correct sized trim in the first place as most on the market do not fit CPR glass and are too loose)

 

[JAG555]

Grip tape / felt tape (assuming you have the correct sized trim in the first place as most on the market do not fit CRP glass and are too loose)

Yes, this is the problem I have on mine.

 

[David retro]

Yes same! How do you keep them in place by the way? Tape?

Backglass Friction Tape - 1-Foot

Backglass Friction Tape - 1-Foot Friction tape (aka grip tape) used between the backglass and the metal lift channel of older Bally, Williams and Stern pinball machines. If you have a loose fitting lift channel, using two 2" strips of this tape will tighten up said fitment. One 1-foot roll is...

retroarcadespecialists.co.uk

this should help for back glasses

 

[David retro]

@David retro any luck with the Stern signs yet?

Hi Bud
got 4 of these on order from stern
Will chase up for a lead time
Many Thanks
David