KendarTheOrc
Site Supporter
If I ever sell and someone asks for a pic of "Shrek's backside" I'm gunna lose it
Pinball info
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Reality check
- Thread starter Bobbdobalina
- Start date
The same person who stored my Fish Tales in a lake. Or maybe in the main ballroom of the Titanic, who knows...
So does that mean your FT has had a soggy bottom then Vee?? (Sorry - couldnt resist
)Yeah, it's going to come last in the technical (or maybe just the signature bake)...So does that mean your FT has had a soggy bottom then Vee?? (Sorry - couldnt resist
Bottom protection - Available from Amazon, Screwfix, Halfords etc. works out around £2.50 each and you can pay it forward when you sell a Pin, perfect size too.
That's pretty useful
They come in handy for lots of things, and can clip together to form a larger area.
I've used them when decorating, and protecting the floor when removing a washing machine.
They certainly are handy - I've reserved a couple for use with my drive-on vehicle ramps. On the pebbly road surface in the street, the ramps would skitter away as soon as the wheels made contact, these give the necessary adhesion to prevent that. The traditional remedy is a loop of old carpet around the lowest rung of each ramp, but even then the poor contact between the surface and the metal runners could see one slip while ascending the ramps.
Last edited:
I've been using these since they were posted on the forum a while back, and like you I've also been including them when a pin leaves here. Very useful and just the right size.
I have to ask... why has the head been removed from that Ghostbusters?
I’ve lent it to a friend and he had to get it up a narrow staircase with a turn in it on his end. Took the head off before Martin collected it to make it easier for him.