Complete Mishmash self build - let’s make a pinball machine

[AlanJ]

Playfield needs some attention , so strip and clean. new rubbers ordered. It’s filthy. I cleaned it up a bit at first, but it needs a proper clean.





Next job is to sort out the 3 flipper mechs

 

[myPinballs]

Next job is to sort out the 3 flipper mechs

Bin them and install Williams WPC flippers

 

[AlanJ]

All nicely cleaned up, rubbers ordered but not arrived as hoped this morning, so on with the under playfield stuff.

 

[AlanJ]

Right flipper Eos switch and the upper flipper activation switch stack is a mess. I fixed it temp by sticking a rubber ring over one bit just to make it work.


But now it’s all fixed properly with a brand new switch stack


Yes i know the rest of the assembly looks awful, but it’s working pretty fine so i’m going to leave it until later.

I have always struggled to work on the flipper assemblies when the playfield is raised, but today I discovered a new essential tool that makes the job so much easier :

With this I can easily reach everything on the playfield.

 

[meesterpieter]

looking good

 

[Goodwinsplace]

@AlanJ this was an amazing morning read. What a great build, thanks for sharing your progress throughout.