Itch
Registered
Fitted speaker lights and inserts, along with flipper decals and coin door plaque, all supplied from @Colywobbles
Pinball info
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
For Sale Col’s Pinball Mods , General Store & Hired Help.
- Thread starter Colywobbles
- Start date
Silverpaolo
Site Supporter
Turtle power!!!!
Itch
Registered
Silverpaolo
Site Supporter
Two great games right there
Some @Colywobbles magic on GZ this weekend... lovely TOHO speaker light inserts to go with my Feed Frenzy LED board and LED's.
Thanks Col - they're great.
Last edited:
OP
OP
I am away to Tokyo this coming Tuesday 28th Feb for 10 days so Bertha having a rest.
Col
Col
Safe trip, good luck to you both.
OP
OP
A Little Creech protection for those who have seen their snack bar and the large leftmost ne suffer breakages.
I’ve slightly shortened the slots adding a little more strength to these areas and oversized by the usual 1mm all round.
These have been done in clear but my usual Flourecent Pop ones are also available.
Shout if needed.
I’ve slightly shortened the slots adding a little more strength to these areas and oversized by the usual 1mm all round.
These have been done in clear but my usual Flourecent Pop ones are also available.
Shout if needed.
OP
OP
Ive done the whole set as I currently own a TFTC albeit going up for sale soon as NIB ordered today
Mind you the full set is absolutely huge but you can pick and choose no problem.
Bobbdobalina
Site Supporter
…….PF? 
Hi @Colywobbles - I’ve sent you a DM for some BM66 bits 
Ive done the whole set as I currently own a TFTC albeit going up for sale soon as NIB ordered today
Mind you the full set is absolutely huge but you can pick and choose no problem.
Hi Colin, how much would the full-set be?
OP
OP
Pm’d
OP
OP
A mad couple of days before I head to Center Parks for a 4 day Famalam Chill
Anyhow remade these ramps for AIQ for anyone else that has them crack or wants a spare £7.50 each plus postage.
forgot to take pics but you get the idea
Anyhow remade these ramps for AIQ for anyone else that has them crack or wants a spare £7.50 each plus postage.
forgot to take pics but you get the idea
thanks Colin
definitely interested, but would like to get my TFTC setup again, thinking i might go with a red or blue plastic colour
OP
OP
Terminator 2 extended set now available pm for more details.
ROBERTDAVIES1977
Site Supporter
Can I just ask if you have ever done the top playfield for Stern WPT ?
I don't think they are made from acrylic as do not buff up with any any sort of cutting compound.
So I will get a replacment and just thought I would ask if you have done one and kept the file.
Many Thanks
I don't think they are made from acrylic as do not buff up with any any sort of cutting compound.
So I will get a replacment and just thought I would ask if you have done one and kept the file.
Many Thanks
Attachments
OP
OP
I have done upper Playfields for a couple of pins but not sure if WPT is one of em.
I think they were done in 5mm Extruded Acrylic if memory serves me.
I’ll check my files tomorrow
SteadyP
Site Supporter
Hi Col- I’d also be interested in a replacement upper playfield if you’re able to make one- could drop off my existing one if this helps?
OP
OP
Yep however I am soon shutting shop for a week as big Op incoming.
I have one or two jobs to get out before but as soon as I’m back on my feet I’m happy to try sort.
I have one or two jobs to get out before but as soon as I’m back on my feet I’m happy to try sort.
Jib
Site Supporter
Good luck with the op Col, hope it all goes well and you have a speedy recovery.
Good luck Col, positive vibes sent your way.Yep however I am soon shutting shop for a week as big Op incoming.
I have one or two jobs to get out before but as soon as I’m back on my feet I’m happy to try sort.
SteadyP
Site Supporter
No problem Col- hope you’re okayYep however I am soon shutting shop for a week as big Op incoming.
I have one or two jobs to get out before but as soon as I’m back on my feet I’m happy to try sort.
OP
OP
Ok guys I’ve a few outstanding orders I will try my best to get out Tues/Wed but I am in for my Op this coming Thursday so will be shutting shop until I access how I can cope afterwards.
Hopefully it’s only a few days and I’m back to myself on light duties to start.
Thanks for all the support and orders over the past several months keeping my mind off things it’s truly appreciated
Coly out
More info here.
Hopefully it’s only a few days and I’m back to myself on light duties to start.
Thanks for all the support and orders over the past several months keeping my mind off things it’s truly appreciated
Coly out
More info here.
Me and Bertha having a short Break but hopefully back very soon.
For those who do not know I was diagnosed with Cancer around a year ago due to a tumour on my Kidney. Without mentioning names I want to send a heartfelt thank you to the many members on here who I can now count as good friends for reaching out and helping me come to terms with it all. So 🙏 ❤️ 🤗...
www.pinballinfo.com
OP
OP
Back at it with a vengeance although have planned Holiday starting Sunday for a couple of weeks.
Been working on something the past couple month’s that should be shown on a forthcoming @Gonzo chinwag
A bit of my heart and soul went into them so hope you like.
In the meantime some me stuff started on Galaxy to get ready for Pinfest.
Shout out to @new forest pinball for the inspiration having just finished his Paragon set and many more in the past.
BTW this will be up for sale down there if anyone interested inc new CPR backglass and optional NIB playfield.
Intentions were to put the dual code on and get it super nice but due to many things in life my DrDude will be my last big workshop.
Been working on something the past couple month’s that should be shown on a forthcoming @Gonzo chinwag
A bit of my heart and soul went into them so hope you like.
In the meantime some me stuff started on Galaxy to get ready for Pinfest.
Shout out to @new forest pinball for the inspiration having just finished his Paragon set and many more in the past.
BTW this will be up for sale down there if anyone interested inc new CPR backglass and optional NIB playfield.
Intentions were to put the dual code on and get it super nice but due to many things in life my DrDude will be my last big workshop.
First off, thank you Col for your kind words. To think I may of inspired anyone is a humbling experience indeed!
Second. Without your patience and plastics knowledge none of my crazy mod ideas could of been possible. @Colywobbles
When we send you our crazy list of requests and requirements you never fail to deliver. “Col can this plastic be exact size please? But two holes need to fit over stud A and the other holes over screw B”. Oh and in three colours please! “
Here’s a reminder of the F2K and Seawitch customisations (available in three colours
).......these machines really sing with your plastics.Thanks again Col. Paragon plastics are starting to look absolutely gorgeous. Viking, Genesis and Cybernaught next
Your a real asset to the community .......where would we be without you.....
All the best and take care.... Keef
...... oh and here’s project paragon....... 
