Tumbler media

[Andy_B]

It may have some residual magnetism depending how it was formed. Ferritic and Martensitic stainless tend to have a slight magnetism whereas Austenitic not so much unless the material has been worked such as stamping out washers. (Geek mode off)

Sent from my SM-G960F using Tapatalk

 

[BigIan]

Looks like lymans stuff is magnetic, by design. Easier to separate from the brass with a magnet

 

[Dave Bishop]

Bugger!
I see they sell a

OK so will have fun with that then...

gonna start with the larger mechs/subways first and see.

I do remember a tip from somewhere.. was it to put posts/screws/nuts in a nylon washing tablet bag or something.. keeps all the bits in there, but still gets them clean

 

[BigIan]

I though the washing tablet bag was for washing small bits in a dish washer. Worth a try though. Interested in your results.
got to be worth trying something that doesn’t stick in the heads of screws

 

[Andy_B]

The tumbling media will just destroy the bag. You are thinking of putting parts in the dishwasher

Sent from my SM-G960F using Tapatalk