Pinball info
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
In Progress The next custom project
- Thread starter s000m
- Start date
So I initially used visual pinball.
But you can just do it old school by holding stuff in by tape and throwing a ball around.
Buying all the parts meant ordering from various companies.
Mantis pinball for lane guides, harness support brackets and T support brackets
Marco Specialties for parts of the ramp diverter from HS2
Planetary Pinball for more HS2 ramp parts that even Marco didn't have
A ton of switches, targets, posts and star posts for the game from Retro Arcade Specialists
The list went on and on. I needed slot of coils, brackets and diverter brackets for trial and error.
I also bought a black Friday ramp bundle from ramp o matic to hopefully find a ramp which suited my requirements.
I also enlisted the help of David Morrell who helped me with my last custom ramps for Cyberpunk.
@Ant-H has also been instrumental in helping me with welds and cuts for my custom lane guides as well as some other elements I'm not ready to show yet
I went through many design amendments based on what I could physically make myself, buy to order or just physically get my hands on. Rebuilding a HS2 full ramp diverter assembly was challenging due to part availability but it paid off.
Once I was happy were everything would go I began making some permanent cuts..
Mantis pinball for lane guides, harness support brackets and T support brackets
Marco Specialties for parts of the ramp diverter from HS2
Planetary Pinball for more HS2 ramp parts that even Marco didn't have
A ton of switches, targets, posts and star posts for the game from Retro Arcade Specialists
The list went on and on. I needed slot of coils, brackets and diverter brackets for trial and error.
I also bought a black Friday ramp bundle from ramp o matic to hopefully find a ramp which suited my requirements.
I also enlisted the help of David Morrell who helped me with my last custom ramps for Cyberpunk.
@Ant-H has also been instrumental in helping me with welds and cuts for my custom lane guides as well as some other elements I'm not ready to show yet
I went through many design amendments based on what I could physically make myself, buy to order or just physically get my hands on. Rebuilding a HS2 full ramp diverter assembly was challenging due to part availability but it paid off.
Once I was happy were everything would go I began making some permanent cuts..
Attachments
Really interesting, all sounds expensive! (Having just ordered a load of hobbit parts form the US)
I've always been interested in trying to build one, but lack space and skill set. Thought it would be a good way to learn the electronics and coding elements. I've always thought a re theme would be a good starting point.
I've always been interested in trying to build one, but lack space and skill set. Thought it would be a good way to learn the electronics and coding elements. I've always thought a re theme would be a good starting point.
The playfield rotisserie? You can grab one from pinballshop.nl I think it was about £250 landed.
Its utterly necessary if you want to get involved in playfield swaps. A re-theme is the way to go IMO if you are starting out. The coding is super complex. I've been dedicating literally full weekends to it and still barely have code thats seen as 'simple' I'm no Lyman sheets thats for sure
Anyway thats for a future post.
Was wondering why it was complex but just had a quick look, interesting never thought about having to maintain the state of the switching in memory to compensate for the pre defined rules as well as other factors. I'm assuming you also have to be careful regarding safety by not locking on coils.
It's beginning to become clearer the separation between design and delivery.
From the initial very quick look, yeh it's super complex!
It's beginning to become clearer the separation between design and delivery.
From the initial very quick look, yeh it's super complex!
Bobbdobalina
Site Supporter
Very impressive stuff! The folk on here never cease to amaze 
So once I began cutting everything and setting up the various mechs.
View attachment PXL_20241230_222334835.mp4
The next step was to build up the wiring and start making wire harnesses.
I also had to 3D print some brackets as finding them online was impossible.
Things were starting to come together
View attachment PXL_20250104_173156989.mp4
View attachment PXL_20241230_222334835.mp4
The next step was to build up the wiring and start making wire harnesses.
I also had to 3D print some brackets as finding them online was impossible.
Things were starting to come together
View attachment PXL_20250104_173156989.mp4