What's new
By:
Pinball info

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Expired TAFG Cabinet

Expired Due to no activity
Dave Bishop

Dave Bishop

Site Supporter
10 Years
Joined
Jul 21, 2011
Messages
4,414
Location
Sidcup, Kent
Im getting a new cabinet from Manny at Woodtech so my original TAFG Cab is up for sale.

It's in pretty good shape other than the front, it has Lockbar holes and marks on. The inside of the front has water marks.

The sides are good with only a few minor blemishes have been touched up.

I will be taking the stickers and all hardware out of it. Leaving just the braiding for the ground.

Will post photos soon.

Looking for £200 ono.
 
Manny's work is top notch and it will look brand new again.
Was looking at getting the original Cab Redecalled but haven't got the patience to have the game down for a month or so.

Mannys Cabs are true to original with joints etc, but smoother when decals applied looks like glass. And the wood is 13 ply so stronger.
 
image.jpg
image.jpg
 
Might have been with earlier ones, I know Manny took apart WPC cabinets piece by piece to see how they went together.

I would be interested to know which Cabinets? We're they decalled (if so what ones) or sold bare?
 
Please forgive my ignorance Dave but when you say all hardware and stickers - does that mean no TAF graphics on cab, no hinges, no legs? Was looking to build a vr table and as most, TAF pin is a fav. After spending 450 on a new 50" LCD in the lounge and taking old 40" into garage to test for vr table, managed to remove mouse from motherboard, disturbed speaker cable and speaker fell onto donor LCD TV and smashed it[emoji35] [emoji24] [emoji24] [emoji24] need new LCD TV but if this is what I want with decals will buy a LCD to fit your Cab
 
lovely looking cab Dave. Aren't you worried about sunfade though or is there now a blind on the window? (or are they old photos from last year when you built the shed?)
 
The cabinet will have the decals on it. I might leave the gold siderails on it (few dents) But that's it

Everything else will be swapped over.
 
Two side windows have blackout blinds and the pins all have covers to protect against fade. That and the cabin has a canopy
image.jpg
image.jpg
 
Out of interest, how much does a new cab from Manny cost? (with or without decals)
 
Cabinets run £550-600ish I think for bare cabinets.

Ask group members on here how good his cabinets are
 
Another pinball machine destroyed by the addiction to bling :(

Keep it original please.
 
abaxas said:
Another pinball machine destroyed by the addiction to bling :(

Keep it original please.
Click to expand...

And, seeing as it seems to now be customary to post the same thing twice...


Another pinball machine restored to its former glory for future generations to enjoy :-)

Keep it up please.
 
haha though. Bet you didn't see this coming did you. Three times!

Another pinball machine restored to its former glory for future generations to enjoy :-)

Keep it up please.
 
Dear Mr Abaxas

Do I tell you what to do with your pins.

Go out and buy a TAFG and do what you want to it. I will do the same as I OWN IT!
 
I prefer originality above all else. I quite like the occasional ding, scrape or graffiti. It's like it was when they were in the arcades (other than the very short period of being new).

You can destroy the patina of use, but you can never recreate it.

(sorry for the doulbe/treble post but this forum softwre can be shyte)
 
abaxas said:
I prefer originality above all else. I quite like the occasional ding, scrape or graffiti. It's like it was when they were in the arcades (other than the very short period of being new).

You can destroy the patina of use, but you can never recreate it.

(sorry for the doulbe/treble post but this forum softwre can be shyte)
Click to expand...

Horses for corses - some prefer original, some prefer mint.

(no-one else has the problem - Must be a user issue ;) )
 
You must log in or register to reply here.
Back
Top Bottom