woody79
Site Supporter
Any other pulp fiction owners having big dimples problem on their playfield having it spreading all over now the playfield. Thanks any feedback back
Pinball info
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Pulp fiction playfield
- Thread starter woody79
- Start date
Do you have any photos?
I expect dimples to appear its part and parcel... How big we talking? Most likely from violent air balls
I expect dimples to appear its part and parcel... How big we talking? Most likely from violent air balls
Played a few games prior to putting the playfield protector on, can't say I noticed anything unusual, few little ones by the saucer where the ball kicks out.
Not sure if your following the PF thread here, but general concencus is to turn the flipper power down a touch, using factory settings they are OTT
Not sure if your following the PF thread here, but general concencus is to turn the flipper power down a touch, using factory settings they are OTT
Just had a close look at mine, I can see the odd one but nothing out of the ordinary.
If it had more it's not something I'd be concerned about.
If it had more it's not something I'd be concerned about.
The clear coat used is definitely weaker than previous applications on other playfields. It may have also been down to the curing period as there was pressure to get them out the door.
I know that Neil and a few other have sent off pulp fiction playfields to Kruzman in the US as they've seen the clear coat crack and chip, specifically around the scoop but also around inserts.
I know that Neil and a few other have sent off pulp fiction playfields to Kruzman in the US as they've seen the clear coat crack and chip, specifically around the scoop but also around inserts.