Expired INDY 500 PINBALL MACHINE

[geoff@burnley]

I have for sale a Bally Indy 500 pinball machine that is in very good condition.
I have had this machine for 2 years and I have not had any problems with it.
I've only used it maybe 3 times a week and now that I'm having my cellar done out I cannot get the headroom (6'2") to put the machine back where it was.
It is wrapped up and I have used stock photos to show the machine but it can be switched on and shown to people but the legs have been taken off it although I do have a large entrance hall to lay it flat on the floor.
The sound is still good and everything seems to work but it is missing a couple of targets but I guess these can be got hold of.
The glass is good and the case is in very good condition.
Please text me on 07958 079795 to have a look at the machine and I would appreciate genuine enquiries and any decent offer will be looked at.

 

[Sgt GrizZ]

Hi Geoff

We do ask for a price to be stated on forum sales. Cheers.

 

[mark9]

Some pics of the machine would be good too

 

[geoff@burnley]

Hi Geoff

We do ask for a price to be stated on forum sales. Cheers.

Hi
I'm looking for around the £1000 mark
I would add proper pics but the machine is wrapped up now as I was expecting to keep it until the builders took a couple of inches off the ceiling and I have have lost my clearance.
It's too heavy to put on the floor without assistance.

 

[geoff@burnley]

Hope the attached pics help everyone.
Cheers

 

[windoesnot]

Are these the right replacements for the missing targets:

http://www.pinballheaven.co.uk/shop/pinball-heaven/plastic-target-for-indianapolis-500-03-9323-3-13

 

[Carl Spiby]

That's just the clear front bit, you need the target housing and PCB too.

http://www.marcospecialties.com/pinball-parts/03-9322.1-7
http://www.marcospecialties.com/pinball-parts/A-20401

 

[Sgt GrizZ]

Housings can be reused, but you have to wrestle the little coiled up roll spring hinge thingy out, which involves a lot of swearing. Well it did when I replaced some