help with flintstones bronco diverter

[H3RBSKI]

need a bit of help with this as its driving me mad, when i first got the table the diverter didnt work at all, quick look i noticed one of the wires had snapped so so easy fix i thought, That got it "working" however the solenoid kicks in and the diverter moves across as it should but this still sends the ball into the time machine instead of the bronco. Another look and i noticed the arm itself is very worn (see pic) so i ordered a entier new assembly. replaced it all today and it still has the same issue, the solenoid activates and pushes the arm to the left the ball pops up and just goes straight into the time machine what else can i check as its driving me mad

 

[H3RBSKI]

well..... its fixed. 2 stupid oversites, 1: the back wall was a bit loose noticed one of the screws that tighten it to the play field was sat out 3-4 mm so tightened that up so now the back wall sits solid, 2: the plate under the diverter that moves the ball either way was loose and just leaning to the left the entier time meaning there was a huge gap between the lip and the diverter. straightened it and tightened it and now the ball goes to the bronco every single time it needs to and the time machine when it doesnt. lesson for today, make sure you dont have a screw loose lol

 

[MarkS]

Glad you managed to fix it and was relatively simple