Pinball info
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
I'll do that. I just wanted to make sure it wasn't unavailable if the worst happened.
I've had a right drama with the post recently.
Everything you touch is a drama mate, in all the right ways, and this is why we love you.
Well I appreciate that but I'll spare you the tale of the lost oven hinges out of kindness
ill send them back looking like my newly designed TMNT Ooze protectors but they will look Bloody Cool & probably be my Breast looking ones to date. 
Gonzo, You could trace the slings, transfer to card, cut out in card.
then replace the slings with the cards (could even draw on them if you want to be fancy) then if the slings get lost in the post your sorted...
then replace the slings with the cards (could even draw on them if you want to be fancy) then if the slings get lost in the post your sorted...
I like it Ian mate. I may put some of that quilted loo roll I stashed away during the first lockdown on top. I think the additional bounce and protection will be perfect.
I may even be able to write some of the rules onto the cardboard so as I can remember what to do when I get bored of hitting the right ramp 10 times in a row.
OP
OP
Deleted member 2463
Yeah two huge games with huge demand, I'd put them up by £500 myself.
is there lots of ooze in TMNT? I can't remember seeing much.
is there lots of ooze in TMNT? I can't remember seeing much.
Good news, they weren't quite pricey enough imo
OP
OP
Deleted member 2463
my god man what you have done to it?!
Neil.
Neil.
Lickashot
Site Supporter
Says he who defamed IMDN
That said, I thought EHOH looked good, not so much now.... Burn it, burn!!!!!!
OP
OP
Deleted member 2463
not sure I get the point of those screens? is it just a mod or do they link to gameplay?
No, just a mod that plays clips from the film. No point, just an indulgence.
OP
OP
Deleted member 2463
V1.02.0 - Mar. 8, 2021
======================
- Fixed a problem in Gappa Angry where occasionally, upon locking a ball, a new
ball is not introduced back into play.
- Fixed a problem where the game could crash when using the flippers to quickly
alternate back and forth between attract mode display effects.
- Added logic to reduce load time of videos from the SD card.
- Added logic that allows "Santa Claus Conquers The Martians" to be the first
Locked Room House mode to be played when playing this rule during the month
of December.
- Added a "Santa's Helper" adjustment that allows the "Santa Claus Conquers The
Martians" House mode to be the first Locked Room House mode to play during
the month of December. Default = YES. Note: The House Room must first be
unlocked with a Skeleton Key that is earned via the Junk in the Trunk rule.
- Added an "Additional Turret Motor Usage" adjustment. Options are:
1) None
2) Game Start
3) Garage Ball Lock
4) Game Start + Garage Ball Lock
Default setting = Game Start
- Added logic to rotate the House Turret at Game Start.
- Added logic to rotate the House Turret upon locking a ball in the Garage.
- Fixed a problem where the game might not award the correct number of credits
when a bill mech. is attached to the Center Coin switch.
- Now the game logo appears during the PowerUp/Boot sequence.
- Updated to node board firmware v0.67.0
======================
- Fixed a problem in Gappa Angry where occasionally, upon locking a ball, a new
ball is not introduced back into play.
- Fixed a problem where the game could crash when using the flippers to quickly
alternate back and forth between attract mode display effects.
- Added logic to reduce load time of videos from the SD card.
- Added logic that allows "Santa Claus Conquers The Martians" to be the first
Locked Room House mode to be played when playing this rule during the month
of December.
- Added a "Santa's Helper" adjustment that allows the "Santa Claus Conquers The
Martians" House mode to be the first Locked Room House mode to play during
the month of December. Default = YES. Note: The House Room must first be
unlocked with a Skeleton Key that is earned via the Junk in the Trunk rule.
- Added an "Additional Turret Motor Usage" adjustment. Options are:
1) None
2) Game Start
3) Garage Ball Lock
4) Game Start + Garage Ball Lock
Default setting = Game Start
- Added logic to rotate the House Turret at Game Start.
- Added logic to rotate the House Turret upon locking a ball in the Garage.
- Fixed a problem where the game might not award the correct number of credits
when a bill mech. is attached to the Center Coin switch.
- Now the game logo appears during the PowerUp/Boot sequence.
- Updated to node board firmware v0.67.0
Bet this will be cheap.
sternpinball.com
Elvira and Stern Pinball Announce New 40th Anniversary Edition Elvira House of Horrors Pinball Machine - Stern Pinball
Elvira and Stern Pinball Announce New 40th Anniversary Edition Elvira House of Horrors Pinball Machine To Celebrate 40 Years on Film and TV CHICAGO, IL – October 26, 2021 – When you hear the name Elvira only one person comes to mind: Horror icon and quintessential symbol of all things spooky...
sternpinball.com
Three predictions lol
1. Price is insane
2. Sold out already
3. Cassandra had #1
1. Price is insane
2. Sold out already
3. Cassandra had #1
Silverpaolo
Site Supporter
Be 12k I’d expectBet this will be cheap.
Elvira and Stern Pinball Announce New 40th Anniversary Edition Elvira House of Horrors Pinball Machine - Stern Pinball
Elvira and Stern Pinball Announce New 40th Anniversary Edition Elvira House of Horrors Pinball Machine To Celebrate 40 Years on Film and TV CHICAGO, IL – October 26, 2021 – When you hear the name Elvira only one person comes to mind: Horror icon and quintessential symbol of all things spooky...
View attachment 151165
Nah the original SLE was more than that - think it was around $18k. I reckon this will be in the same ballpark.
Pinside saying $15k was the RRP, but some distributors saying $20K.
Guy in Netherlands saying he’s got one on order for €15-16K
Guy in Netherlands saying he’s got one on order for €15-16K
Silverpaolo
Site Supporter
Wowzers
It looks awful in purple le looks much nicer
