I believe you mean "sodder"
Pinball info
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Bad pinball advice
- Thread starter cooldan
- Start date
I believe you mean "sodder"
G
geardownthreegreens
Is that like "Cidre" 
No it's how yanks say solder
M
Mark
Yes, after listening to many Topcast downloads, I believe they do say sodder. I still say solder though 
You started living in the U.S of A Rudi ?
I was just being my normal annoying self lol
Can't find your good soldering iron? Just use a blowtorch instead.
When removing anything of the playfield ,you must force the bug#*#s off if thay don't unscrew !!
No need to worry if the plastic breaks !! You can buy new parts anywhere !!!
No need to worry if the plastic breaks !! You can buy new parts anywhere !!!
Always listen to Hank's tips. He's the guru when it comes to Pinball repair and maintenance.
G
geardownthreegreens
Lol I know. I was just trying to ryhmm
G
geardownthreegreens
And if u can't use either, wrap the wires tightly onto connectors and wrap with electrical tape for a good connection
Don't bother cleaning up the battery corrosion, just replace the worst looking components. The corrosive chemicals won't carry on eating through the PCB for months/years until it is destroyed
Buy only Gottlieb pins. They are super reliable and maintenance free
Now don't go and annoy Poibug.
A
abaxas
Admit your favorite film is 'the accused'.
M
Mark
Always sell your pins for a profit - everyone on the forums will be really pleased for you
Always power up an ebay pin as soon as you unload it from your car.
Never bother to check that the last owner wrapped all the fuses in tin foil
Never bother to check that the last owner wrapped all the fuses in tin foil
Problem child Genesis aka Frank N Pin,is now fine
Ramones has been great too,as has MGOW and BH
So ya spend LOADS doing it up,then eventually all is good - well worth it : )
That actually happen?
Well if we are ressurecting this thread...
Don't bother leveling your games, a pin on a nice slant means the ball is more likely to return to a flipper on a shot that would otherwise be SDTM, making your game much more fun to play because your game will last longer!
Don't bother leveling your games, a pin on a nice slant means the ball is more likely to return to a flipper on a shot that would otherwise be SDTM, making your game much more fun to play because your game will last longer!
If your balls get rusty. Don't clean them. Let them scour the dirt accumulated on the playfield for a streak free shine.
silicon spray adds real zip to games especially modern ones.
Last edited:
Put your hand inside an old EM when it's wired the wrong way around by a previous owner, great for good hand speed control, and reflex when it bites.. 
Last edited:
Don't waste your mates time by asking him to help with moving a machine From the car into the house - your wife will always help.
Sent from my iPad using Tapatalk
Sent from my iPad using Tapatalk
Check the beer seal hasn't perished by arcing a fine stream of urine onto your machine as you play...
Don't worry about the glass sliding out of your game after you remove the lockdown bar, friction will hold the glass in place as you put the lockdown bar down somewhere safe...
When you crawl under a pinball with a 'gun' shooter like Dirty Harry or The Shadow, don't worry at all, you'll never smash yr head into it as you stand up causing you to cry like a baby. Oh no that will never happen.
Sent from my C6603 using Tapatalk
Sent from my C6603 using Tapatalk