Pinball info
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Wanted WPC Driver Board Relay
- Thread starter Dex-Jay
- Start date
6v is an odd voltage, most are 12 or 24v DC
or maybe
https://uk.rs-online.com/web/p/non-latching-relays/2209210
they have a few more that seem to fit the spec - search "relay" then select 6v and 4PDT (4 pole double throw)
or
https://uk.farnell.com/potter-brumf...17d11-6/relay-4pdt-120vac-28vdc-5a/dp/1384982 - but seems to have a thread out of the bottom?
Or get one from china, but I could only find a 3A one in 6v :
www.aliexpress.com
or maybe
https://uk.rs-online.com/web/p/non-latching-relays/2209210
they have a few more that seem to fit the spec - search "relay" then select 6v and 4PDT (4 pole double throw)
or
https://uk.farnell.com/potter-brumf...17d11-6/relay-4pdt-120vac-28vdc-5a/dp/1384982 - but seems to have a thread out of the bottom?
Or get one from china, but I could only find a 3A one in 6v :
1.3US $ 1% OFF|Led My4 General Purpose Relay 4pdt,14pins Relais 12v 24v 110v 220v My4nj Relay Switch - Relays - AliExpress
Smarter Shopping, Better Living! Aliexpress.com
www.aliexpress.com
Thanks both of you for looking for me. I've not ordered from pinballcenter before actually.
I'm inclned to go with the Rockwell one from RS. The pins on the base look to be standard (ish) it's just a little taller than the original which doesn't matter.
Yeah 6V is a bit of a strange voltage, I was going to take one of a spare Data East board but those are 24V.
Rich
I'm inclned to go with the Rockwell one from RS. The pins on the base look to be standard (ish) it's just a little taller than the original which doesn't matter.
Yeah 6V is a bit of a strange voltage, I was going to take one of a spare Data East board but those are 24V.
Rich