Sold WPC Driver Board (1992) - needs repair - £30 or best offer.

[mark9]

This board was running fine until a bumper coil locked on and the fuse didn't seem to do it's job.

I've been told it's going to be quite a big job to repair so not worth getting it done with the costs, but might be useful to someone who can repair it themselves.

Can bring to Pinfest or can post out for £6.

 

[ronnie63]

I will offer £30 posted Mark?

Cheers Ronnie

 

[Wizcat]

Wow. That's a good example of why co2 extinguishers are very useful @Poibug @Mooseman @Big Phil

 

[strobey]

And why you should fit correct fuses!!! Wow.

 

[mark9]

And why you should fit correct fuses!!! Wow.

The fuse fitted was 7.5A but for some reason didn’t blow.
F112 for the secondary coils should be 7A.

Ok it was a bit over what should be in but thinking maybe a faulty fuse? It’s one of those looks like it’s filled with white sand.
Looked at my other wpc machines and there’s a few of that type in those too, a bit worrying.

 

[mark9]

I will offer £30 posted Mark?

Cheers Ronnie

Ok can do, pm me.

 

[pinballmania]

The fuses that should have blown first are one of the 5 at the top. All 3A

 

[mark9]

Yet none did? I’ve packaged it up now but you better double check them fuses then Ronnie.

 

[ronnie63]

Yet none did? I’ve packaged it up now but you better double check them fuses then Ronnie.

Lol will do Mark, got a big roll of tin foil! pesky fuses!

 

[mark9]

It is easy to see how fires can start thought, remember last year at Pinfest there was a burning smell, turned out to be coming from Dracula, luckily a few people noticed it.