WPC backglass trim size thickness

[M4carp]

Anyone now if the standard WPC backglass trim channel is 1/8” or 3/16”?
CPR repro‘s are too thick for mine and splitting them.

Thanks

 

[Vimtoman]

Not sure of the sizes but I do know the WPC95 version has a thicker glass so the channels would have a wider slot.
So WPC95 wider than WPC

 

[M4carp]

Not sure of the sizes but I do know the WPC95 version has a thicker glass so the channels would have a wider slot.
So WPC95 wider than WPC

Thanks, somebody else mentioned that on Pinside I think because of the plastic casing for the GI that butts up against the glass, glass is the same I think. Packed them back into the box with the hump
When I get a minute I will unpack and take my AFM trims off and have a look

 

[Durzel]

If WPC95 trims are thicker will they drop into the guide on a WPC89 machine?

 

[M4carp]

If WPC95 trims are thicker will they drop into the guide on a WPC89 machine?

Should do but I will check and let you know how they fit.

 

[Vimtoman]

The WPC95 have a molded plastic holder for the lighting hence the thicker gap on the trim.
The holder and glass thickness means a thicker trim gap.