Williams transformer plug question

[Happypin]

Morning all
quick question on a Williams twilight zone the large plug on the transformer what size are the pins that the wires are crimped to, I what to buy the female pins to tap off that plug.

many thanks
Alan

 

[Dex-Jay]

https://pinside.com/pinball/forum/topic/burned-j115-gi-connector-replacement-on-wpc-bop (see johnwartjr's post)
3.96mm or 1.56" (which is the same size) Molex's I think.

Here's one I made earlier, well it was last year actually. Standard General Illumination (non LED's) burning up wires.

 

[Dex-Jay]

http://www.pinrepair.com/connect/ and that of course is a good read (reference) on all things connectors.

 

[Happypin]

http://www.pinrepair.com/connect/ and that of course is a good read (reference) on all things connectors.

Thank you
Will check later on the links after work.
I'm not replacing the plug I just want the female pins so I can add two wires to get my 240v
Supplying a 12v transformer.
Many thanks
Alan

 

[Happypin]

Terminal pin female .093 on that link.
Many thanks that's a great help.