Wanted Williams plastic backbox lamp shrouds

[Andy_B]

Hi all,
I'm looking for the white lamp shrouds that prevent light bleed from the backboard lamps. I'd get away with the four pot and two singles if anyone van help.
Thanks in advance.
Andy

 

[Pudsey pinball]

Hi all,
I'm looking for the white lamp shrouds that prevent light bleed from the backboard lamps. I'd get away with the four pot and two singles if anyone van help.
Thanks in advance.
Andy

I may have some not sure on condition

 

[Pudsey pinball]

I got these ,need a good wash

 

[Paul]

This sort of thing????

Pinball Backbox Light baffle Bally Williams Stern by John_I

This is a custom redesign of the light baffles used in early Bally, Williams, Stern and other SS pinball machine back boxes. Instead of installing using staples, these are attached using a single screw on each side. Screw hardware will be supplied. It is recommended to use LEDs instead of the...

www.thingiverse.com

 

[stevebm1]

Im sure my pinballs made new ones of these for someone a while ago using a 3d printer

 

[Crewey]

@ScoobyPrints has also 3d printed similar items for my PinBot

 

[Andy_B]

I've seen 3D printed one being offered in the states for $15 a pop just for the singles. I don't know if I've gone all 1970 but that is a bit rich for what was a cheap bit of plastic.

@Pudsey pinball , those would be perfect. Pm incoming.

 

[HomerRamone]

(grabs stl file for later use )
I can print some of these if you get no luck.
[Im sure others can too ]