What's new
Pinball info

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Why is it when a Opto switch goes its....

Julian

Site Supporter
10 Years
Joined
Mar 23, 2014
Messages
750
Location
Bromley
The one buried under all the ramps, toys and just loads of stuff!

My Shadow switch 47 (inner loop) is not working, and its so in-accessible I can barley see the darn thing let alone get to it with out a major strip down!

Anyone know how the battle field comes out?
 
Anyone know how the battle field comes out?

There's a thumb screw at the front which is the one you undo to pivot it up and down and then a hinged bracket at the back that you have to unscrew. Remember to disconnect the wires (should be on connecters) and then just lift out.
 
Thanks, and testing an opto I have read I can use a camera for the transmitter? and also a bright led touch for the receiver?
 
Yees switch test and light on receiver it should then show rerelevant switcha camera will show if transmitter is working or not
 
Yeah used Nexus 4 and nada! So checked a working opto and the same, but found that if i pushed the receiver board switch test saw the switch, so my guess is busted receiver.
 
Back
Top Bottom