What is running off J116 by default on ToM?

[Juggler Spencer]

I'd be interested to know because I piggybacked my display off the 12v on J116 and was wondering what I was stealing current from.
If anyone knows about J117 and J118 as well that would be useful as they are both populated.

Ideally I would choose the header that is drawing the least current for stealing a 12v feed.

 

[CHRIS B PINBALLS]

Display optos for the playfield and optos and coin mech for the cab

 

[Juggler Spencer]

Hi Chris,
Not a huge draw on any of those headers then?

 

[M4carp]

I fitted a 12v supply for my XL display, only cost £15. No need to worry about stressing the driver board then.

 

[CHRIS B PINBALLS]

Hi Chris,
Not a huge draw on any of those headers then?

If you are just running the colour display from it should be fine it gets a little nasty when you have lots of mods plugged in around that area

 

[Juggler Spencer]

If you are just running the colour display from it should be fine it gets a little nasty when you have lots of mods plugged in around that area

Thanks Chris. Just the one mod, so it should be fine.