What's new
By:
Pinball info

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Weird DMD issue on ball drain - Sega Goldeneye

Andy B

Andy B

Site Supporter
2 10 Years
Joined
Oct 6, 2014
Messages
1,407
Location
Hull. England.
Well this is a new one on me.

Have a Sega Goldeneye.

When the ball drains and end of ball bonus screen appears the middle part of the DMD shows nothing/ghosting.

See photo.

Rest of time display is perfectly fine.

This issue also crop up when screen telling you to go for satellite dish shows up.

And it is EVERY time those screens appear, not intermittent.

It’s almost like the software is corrupted or something for those particular screens - though I’m sure this cannot be the case - but then it is weird why the display is absolutely fine the rest of the time,

Anyone have any ideas please?

Thanks

Andy
 

Attachments

  • IMG_3961.webp
    IMG_3961.webp
    181.5 KB · Views: 28
  • IMG_3964.webp
    IMG_3964.webp
    186.4 KB · Views: 29
Paul said:
Is there any other point in playing where the screen is that fully utilised??
Click to expand...
Yep. Plenty of times. E.g. scoring in game etc. no issues at all on those screens.
 

Attachments

  • IMG_3966.webp
    IMG_3966.webp
    155.8 KB · Views: 7
Did you try another display? You could measure the voltages on the display board while this happens (Careful!). Reseat the flat cables. The inverse lines in display check are fine, too?
 
drhex said:
Did you try another display? You could measure the voltages on the display board while this happens (Careful!). Reseat the flat cables. The inverse lines in display check are fine, too?
Click to expand...
Tried reseating cables. No change.

Inverse lines fine.

Don’t have a spare display to test it with.
 
Moonraker said:
Looking at pinwiki, it's probably starting to de-gass (or outgass as they call it).

Data East/Sega - PinWiki

www.pinwiki.com www.pinwiki.com
Click to expand...
This was also in my thoughts but if it were the case then I don’t think it would be specific screen/image degassing. As I say, all other screens are fine - it’s just the end of ball bonus screen and one other where the image does not display correctly.
 
Not a ROM issue for sure, that would manifest in diferent ways. Display is probably getting old and overloading the power supply, just surprised it works with inverse lines. Please see what the voltages do when this happens.
 
drhex said:
Not a ROM issue for sure, that would manifest in diferent ways. Display is probably getting old and overloading the power supply, just surprised it works with inverse lines. Please see what the voltages do when this happens.
Click to expand...
I recall there was a PIN2DMD issue in the past that was caused by a dodgy ROM - maybe some bits somewhere had got flipped? Enough to break the image but not the game logic? - upon replacing the ROM, the problem was resolved.

A

Thread 'Pin2dmd going blank'

I have a pin2dmd colour in my Creature. Sometimes during a game it will go blank - well can still show a couple of random lines.

Turning machine off and on again sorts problem. Only seems to happen during a game, never when just in attract mode. Infrequent and appears not related to how many games have been played that day.

No idea what’s up -any suggestions most welcome.

Mike
 
Have seen on Sega or data east where they use shading by dropping the voltage. Is the image on those 2 slides a half power bit? Could be either the driver board or an outgassing display.
 
slippifishi said:
I recall there was a PIN2DMD issue in the past that was caused by a dodgy ROM - maybe some bits somewhere had got flipped? Enough to break the image but not the game logic? - upon replacing the ROM, the problem was resolved.

A

Thread 'Pin2dmd going blank'

I have a pin2dmd colour in my Creature. Sometimes during a game it will go blank - well can still show a couple of random lines.

Turning machine off and on again sorts problem. Only seems to happen during a game, never when just in attract mode. Infrequent and appears not related to how many games have been played that day.

No idea what’s up -any suggestions most welcome.

Mike
Click to expand...
Yes, but that lost the display altogether with some random pixels lit. This looks like a failing display or power board.
 
Thanks for all the help/suggestions thus far.

I’m going to borrow another display to try with it next week.

Will update after.
 
You must log in or register to reply here.
Back
Top Bottom