This is a normal DMD display for a pinball in a lot of respects. But it only requires a 12v DC input. So works out easier than rebuilding or replacing a faulty DMD driver PCB. Collect from Brum or post out no issue.
Used to be used in Vpins as it only needs 12v via an ATX molex. I do have a lead I can throw in that will connect to your 12v supply either in your machine, or off an external supply.
https://youtu.be/_2P3C7c7H40
https://youtu.be/2fJOBb_s4kg
VISHAY APD-128G032A (google to find PDF)
Used to be used in Vpins as it only needs 12v via an ATX molex. I do have a lead I can throw in that will connect to your 12v supply either in your machine, or off an external supply.
https://youtu.be/_2P3C7c7H40
https://youtu.be/2fJOBb_s4kg
