I got this for my wms IJ but it's the wrong one.
It was bought as tested working. £35 posted UK.
Sent from Tapatalk
It was bought as tested working. £35 posted UK.
Sent from Tapatalk
Pinball info
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Unknown 8 driver pcb £35 posted UK
- Thread starter Alpha1
- Start date
OP
OP
Bump. If anyone has info on what game/s this is for please let me know.
Sent from Tapatalk
Sent from Tapatalk
Does it have a part number on it? If so you could put the number in Marcos search bar. Or put in 8 driver board
OP
OP
There's nothing on it unfortunately
stepper motor driver. https://www.pinballspareparts.com.au/a-19043-1.html (who dunnit?,possibly scared stiff too) https://www.marcospecialties.com/pinball-parts/A-19043-1
Last edited:
OP
OP
THANK YOU!!!!
OP
OP
Looking on IPDB I can see it on the underside of Who Dunnit? but can't see it on Scared Stiff.
the same motor is used on the scared stiff spider in the back box so presumed it may have the same driver board but now i've checked it does seem to be different as it fits near the motor & has a hole in the centre for the motor shaft to go through.
Last edited:
OP
OP
Defintely something there in front of the motor but can't make it out
https://www.ipdb.org/showpic.pl?id=3915&picno=54773
Sent from Tapatalk
https://www.ipdb.org/showpic.pl?id=3915&picno=54773
Sent from Tapatalk
OP
OP
If it was for scared stiff also I would keep it as I would love an SS. But alas it's not, so BUMPz!
OP
OP
Bump £20 posted
Sent from Tapatalk
Sent from Tapatalk