Wanted TZ clock, & TZ parts

[BallyWilliams suck]

Wanted to buy - Twilight zone complete clock (with loom), or just the boards.....

Also a few other specific TZ parts.... Please PM me if you have anything....

Cheers!

J

 

[RudeDogg1]

What parts are you after?

 

[BallyWilliams suck]

Mainly the part that catches the ball (on it's way to the mini playfield) and flips it up onto the playfield. Dave very kindly sent me one about a year ago, and of course, I've misplaced it as soon as I want it!

Other bits I've managed to source......

Need a couple of the long legged optos - s-2187, which I can't seem to work out if standard flipper board optos will work or not....

 

[BallyWilliams suck]

Also just realised I'm missing the opto interrupter gear from insid the clock (the big one).... Shown here:

http://www.pinballspareparts.com.au/03-8824.html
Anyone?

 

[RudeDogg1]

Can't help you there I'm afraid have you tried the legend

 

[elrikos]

Sorry, can't help much here in parts, but it's worth looking into replacing the clock board of it's all burnt up (most are!). German pinball modular do a great replacement board. It's not cheap but eliminates the weak points on the standard board.
Don't buy optos for the original board from anyone but ponball suppliers. Williams used a special order, extra sensitive opto and they aren't available from any standard electronics suppliers, though visually they are the same.

 

[Monkeyboypaul]

Got an old clock board you could have. Worked fine when removed, except one of the LEDs flickered a bit when it got warm, possible due to a bad solder joint.

I also recommend the Ingo TZ clock board - looks great with the white clock face.

 

[knazzo]

I have the Bridge Diverter Gate A-16513.1 .