Found it! Time expander plastic and Dr. Who manual.

[J.C.Rox]

Hello fellas,

Recently got hold a nice Dr.Who but it looks like the time expander plastic was left in the oven on gas mark 6 for 20 mins and they don't seem easy to find but who know which one of you fine gents and ladies has hiding up your trouser leg or skirt?

Also after a manual as that's always nice to have too!

Oh, and a back box latch if you have a spare too,

Cheers,

Jon

 

[Sgt GrizZ]

@new forest pinball was working on some Who machines recently, including my old one. He may be able to help if he has some spares

 

[new forest pinball]

@new forest pinball was working on some Who machines recently, including my old one. He may be able to help if he has some spares

@Sgt GrizZ is correct we have just done two mint refurb dw , one for the south coast and one for a doctor who mobile exhibition in Australia!! That expander plastic is a tricky one...but not as hard to find as the decals for the metal shield....had to make our own. Fortunately we could make good the expander plastics on the two we recently did....will have a rummage for a manual...definitely got some cliffys and a new front spring for the expander.... plus some other parts most probably....just to say the retro refurb cabinet decals were ace! ( @PeteB )
Any thing else wing me a pm.... Keith

 

[astyy]

Freeplay40 on pinside did the Time Expander recently
https://pinside.com/pinball/forum/topic/freeplay40-ramps/page/31#post-3923983

 

[chris b]

I may have the manual will have a look later

 

[J.C.Rox]

Freeplay40 on pinside did the Time Expander recently
https://pinside.com/pinball/forum/topic/freeplay40-ramps/page/31#post-3923983

Thanks mate I'll ping him a message

 

[Toads]

@Sgt GrizZ is correct we have just done two mint refurb dw , one for the south coast and one for a doctor who mobile exhibition in Australia!! That expander plastic is a tricky one...but not as hard to find as the decals for the metal shield....had to make our own. Fortunately we could make good the expander plastics on the two we recently did....will have a rummage for a manual...definitely got some cliffys and a new front spring for the expander.... plus some other parts most probably....just to say the retro refurb cabinet decals were ace! ( @PeteB )
Any thing else wing me a pm.... Keith

I look forward to seeing the mobile exhibition down here in Australia.
My partner is also a pinhead and follows DW and she also has a DW pin.
I believe "cliffy" is also making the expander cover.

 

[J.C.Rox]

Freeplay40 on pinside did the Time Expander recently
https://pinside.com/pinball/forum/topic/freeplay40-ramps/page/31#post-3923983

I just bought his last one, thank you so much for the lead mate, well chuffed!! Got the other bits from the legend that is @new forest pinball so thread closed!