Pinball info
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
The pin jack! Am I missing something?
- Thread starter Colywobbles
- Start date
Ashbo
Site Supporter
I'm not sure you are missing anything no....
OOH, I want one! can you charge me massively over what I would pay if I just went to home depot?
Excellent - wish I'd seen these before.
£22.99 from Screwfix - just ordered mine for collection
£22.99 from Screwfix - just ordered mine for collection
What is the maximum weight it supports? I'm guessing that is unknown as it isn't designed to support weight, it's for pushing/pulling.
It may work but doesn't look that stable and I personally wouldn't trust it with the weight of a Pinball machine without other precautions in place.
*And make sure you don't accidentally hit the release lever!
It may work but doesn't look that stable and I personally wouldn't trust it with the weight of a Pinball machine without other precautions in place.
*And make sure you don't accidentally hit the release lever!
Jib
Site Supporter
Probably not good for me but I just get on the floor and do the turtle!
Just had a look at it and if youve got rubber protectors on your feet like yours it says you need to remove them before you can use the tool, so you have to lift the machine to remove the rubber protectors before you can use the tool to lift the machine to adjust the legs and then you have to lift the machine again to put the rubber protectors back on, and its $125.
OP
OP
It’s one of the few Cary Hardy videos I’ve turned off! How can he recommend a $130 gadget that can be like Phil said bought at home depot
Agreed on the Pin Jack!
However, do you find your way is putting too much stress weight on one point on the bottom of the cabinet? I am only asking, as I know the Stern modern cabinets are not the best build quality.
OP
OP
Never had a problem and it’s only for a second or two on 1st setup.
Sadly I can no longer level up in turtle stance and since doing this it’s saved me a hell of a lot of back trouble.
The other thing is the fact it’s a lot quicker as I can view my level without climbing under each time I twiddle a leg.
Sadly I can no longer level up in turtle stance and since doing this it’s saved me a hell of a lot of back trouble.
The other thing is the fact it’s a lot quicker as I can view my level without climbing under each time I twiddle a leg.
Just do what I do, get some mates round and insist you need to be the one looking at the level..........
next product from the pin jack makers and to be endorsed by hardy…
* red dwarf fans needed to get joke
* red dwarf fans needed to get joke
My Col Jack seem to work fine these past years.
I cannot believe how clear it is under you machines @Colywobbles where do you keep all your crap? Respect!!
Here's mine 
I cannot believe how clear it is under you machines @Colywobbles where do you keep all your crap? Respect!!
Father Christmas is currently using mine for storage……..
Ashbo
Site Supporter
Now that's a lineup!!!!
Just how it should be.