Found it! Table glass

[Sgc1]

Looking for table glass for standard table round Manchester if any one could help please.

 

[stoptap]

Located in Preston.

https://www.pinball.co.uk/spares-ac...yfield-glass-21-x-43-collection-only-08-7028/

 

[Pick Holder]

@philpalmer doesnt send the glass - you have to go to his and collect as it says on the link.

It is a funny thickness to get at most glaziers (who can cut, harden and polush edges no problem) as its imperial thickness. So its probably a better idea to get the proper stuff.

 

[replicas]

I have a few second hand sheets of standard glass in good used condition.

 

[Spadge]

I’ve got some, for beer money, collect Ossett/Wakefield - could ask nicely and get @pinsinthewild to bring some back to Oldham st the weekend.

 

[pinsinthewild]

No problem

 

[philpalmer]

I've got some old sheets, FREE....

 

[Rus121]

@philpalmer doesnt send the glass - you have to go to his and collect as it says on the link.

It is a funny thickness to get at most glaziers (who can cut, harden and polush edges no problem) as its imperial thickness. So its probably a better idea to get the proper stuff.

Yep, its either slightly loose or slightly tight when converting to metric. Not a problem for modern sterns if its slightly tighter however as it stops a lot of the rattle from shaker motors.

@philpalmer I was sure I bought some glass from you years ago, arrived fine no problem. Did you start getting breakages?

 

[philpalmer]

Dont really remember ever posting glass, sounds like a stupid thing to do....

 

[Spadge]

Sounds like something I’d do

 

[Sgc1]

Thanks everybody for the replies .