I need some black T molding for my Black Rose backbox. Where do you get it from?
thanks
Kev
thanks
Kev
Pinball info
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
T Molding suppliers?
- Thread starter kevlar
- Start date
From here maybe? http://www.t-molding.com/store/home.php
Actually that site is in the US I think. If you want something more local then maybe they have what you need here: http://www.arcadeworlduk.com/categories/Arcade-Parts/T-Molding/
Actually that site is in the US I think. If you want something more local then maybe they have what you need here: http://www.arcadeworlduk.com/categories/Arcade-Parts/T-Molding/
OP
OP
Thanks mate.
No worries - have to say i'm not that familiar as it's not used on the DE table i've got.
I presume it's the same stuff they use on arcade cabs so hopefully that second site will have what you need.
As i'm in the process of blinging up my R&B i'm wondering if it might actually be a nice addition.
I presume it's the same stuff they use on arcade cabs so hopefully that second site will have what you need.
As i'm in the process of blinging up my R&B i'm wondering if it might actually be a nice addition.
OP
OP
If it hasn't been fitted previously you will need to cut a slot. Alternatively you can buy some sticky back stuff, I bought some chrome from amazon.
I'll give it some thought - there is lots of other stuff to do first and that's something I could do at the very end.
I presume the slot could be done using a router with a fine bit or I could even use a dremel with an appropriate attachment. I'll keep it in mind.
I presume the slot could be done using a router with a fine bit or I could even use a dremel with an appropriate attachment. I'll keep it in mind.
OP
OP
Thanks for the link Wiredworm, I bought some black with chrome stripe. It was really easy to fit. Here's a before and after....
A new translite lift trim is on order. The chrome strips on the speaker panel are also a bit damaged, anyone have a source for those?
A new translite lift trim is on order. The chrome strips on the speaker panel are also a bit damaged, anyone have a source for those?
B&Q have H-bar in chrome effect, not sure of the different sizes but they looked like they had about the right size. Also had stuff that looked like it would do for glass channel under side bars
Bit vague I know but worth a check if you live near a b&q. or post the width between the uprights of the H (or thikcness of speaker panel wood) and I can check my local
Bit vague I know but worth a check if you live near a b&q. or post the width between the uprights of the H (or thikcness of speaker panel wood) and I can check my local
OP
OP
Thanks Biglan, I do have a B&Q not too far away, will check it out.
Cheers
Kev
Cheers
Kev