What's new
By:
Pinball info

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Expired STtNG plastic protectors

Expired Due to no activity
Cryptkeeper

Cryptkeeper

Registered
2 10 Years
Joined
Feb 5, 2014
Messages
1,189
Location
The free state
Hi guys.
I'm making myself a set of these so might as well offer them out.
I have a large laser and a stack of 2.5mm polycarbonate.

I've done the cad work and have done a test fit on my own machine.
Have to do a few adjustments but should be finished tomorrow!
7 protectors.
Slings x 2
Stand ups x 3
Command decision
Select mission

20e + postage! I guess postage would be 2 or 3e
Pics of the test run below!(ignore my smashed up plastics,new ones incoming!)

2015-11-05 21.36.37.jpg


2015-11-05 21.10.33.jpg


2015-11-05 21.10.47.jpg


2015-11-05 20.09.26.jpg


2015-11-05 21.10.56.jpg
 
Actually could someone post a pic of he command decision scoop/hole?
as you can see some of mine is missing!
not sure if something screws into those two posts.
 
**** I'm kinda winging it on that bit.
Do you think the way I have it is ok?
Covering the end post when the plastic doesn't?
 
Me also, if you have a extra set just PM me where you want the payment...

Taaa, looks great, I had these on my Metallica and the way the light comes through is very cool..
 
Cool Ian,
I just want to make sure I have them 100% before I take any payments.
So I'll keep this thread updated.
Have a revised set to try later
 
Thanks lads!
More interest than I thought!
I have to say they are coming along very very nicely.
Just a minor adjustment to the time rift one and I'm ready to rock.
 
Could I get a set? Let me have your details and the money will be on the way...

Cheers

Jon
 
OK guys!
Hot off the press!
7 pieces,2mm clear petg .they have film on both sides .
wqe696PC2_uoiaRlD-vVqCbU6jJIQ2eNpwl1zg-NzIM.jpg


Just going to take normal paypal payments,no gift or 4% or anything so make sure your address is the right one.
18 pounds delivered.
sorry about the added cost of postage.its 4euro :(
I'll try get it cheaper when im at the post office and I'll refund if it is.
Ian dont worry about it for the moment I'll hold onto a set for you and you can grab them at the meet.
PMs incoming guys!

Dave
 
right lads,
Every set that has been paid for has been posted!
hopefully making there way to you now even tho the post office woman is a fool.

still a few more sets there for anyone that wants them.

BTW the petg smells a bit after cutting but this will fade after an hour or two of being out of the bag.
so if your not installing them straight away maybe leave the bag open .

Looking forward to hearing feedback be it good,bad or indifferent so fire away ;)
 
You should be receiving these tomorrow or Friday
Installation is fairly straight forward but heres a few tips!

Peal the film of both sides!

- Install both sling protectors and then tighten them up.they have a good bit of play so you can get them even.
Please make sure your cannon have clearance.should be loads but please check!

- The right stand up one goes in easy.

- you'll have to remove the left wire form to get the left stand up protector in.Just 2 screws iirc.

-Time rift goes straight in but you should fit the command decision one first.

-Command decision is a bit tricky.
I took out the 2 screws holding in the delta ramp and the nut at the entrance post to make life easier.
When you get your original plastic out there is a clear plastic with a mini post bolted to it.
This MUST be undone and the protector bolted onto the plastic (you'll know when you see it!)

-Mission select/ Q target.
Unscrew the pop bumper cap a little to fit it .straight forward.

And please be carefully with your original plastics!
don't oven tighten when reinstalling.
Hand tight + a quarter turn is enough !!!

And thats it!
 
You must log in or register to reply here.
Back
Top Bottom