Expired Stern/Spike shaker motors (Gauging Interest only!)

[Epotech]

Having seen the **** poor Cointaker effort at the weekend and as I'm being constantly badgered to build more...

Is there interest in shaker motor kits?

For the uninitiated I build and sell the Quake shaker kit for Stern SAM (and Spike). These plug directly into the system, no board required! usually around £75 (I won't know cost at this stage).

Please don't PM me, I don't have stock! (although @alchy does...) this is purely to see if it's worth the considerable pain of making a new batch IF I CAN GET MOTORS!

 

[kevlar]

I'll take another please Phil.

 

[mark9]

Yes please. Would it be interchangeable between Spike and SAM?
I don't have a spike machine but just interested for future reference.

 

[Epotech]

yes it will be directly interchangeable

 

[Epotech]

OK, these are go!

 

[Mooseman]

Yes plz one for me

 

[Kilgore]

id definitely take one too please if you decide go ahead

 

[Kevin]

I will have two to start with

 

[Paul R Owen]

How easy is it to fit one to a WPT and a RBION?

 

[Epotech]

if the machine supports it (go into settings and see if shaker use is in there) it's a 10 minute max install.

 

[new forest pinball]

We would have 2... Customers are always asking for them...

 

[lukewells]

I'd like one please

 

[mark9]

I don't think RBION or WPT would be supported as POTC isn't.

 

[J.C.Rox]

Def one for me please!

 

[Paul R Owen]

I don't think RBION or WPT would be supported as POTC isn't.

Thanks - I was confused there as I don't remember seeing any Shaker options in any of the menus on either Pin .

 

[mark9]

You could still put one in though, somehow. I had one of Phil's original run with the pcb included and wired it into a UFO flasher on my AFM, but I guess you need the PCB for that to work.

 

[Epotech]

You could still put one in though, somehow. I had one of Phil's original run with the pcb included and wired it into a UFO flasher on my AFM, but I guess you need the PCB for that to work.

and I can supply a board to do this. It's just not part of the kit as it's not needed usually. Anyone who played my BOP2.0 at Swavesey, this was the setup that was in it. Useful for driving any mod too!
Board would be £25.

 

[Monkeyboypaul]

I'd be up for 1 with the PCB for Stern and/or B/W.

 

[chuckychucks]

I will take one for my Metallica when i eventually get it.