Anyone know if A08 is a standard type of key and know where I can get replacements?
Before i drill...
Cheers
Before i drill...
Cheers
Pinball info
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Standard keys?
- Thread starter strobey
- Start date
OP
OP
Might be a Teskey A-series
Going to try the local Timpson next week, will report back
Going to try the local Timpson next week, will report back
On this page there are 3 keys denoted as A08: https://www.lostakey.net/a-code-precut-replacement-keys-c-49/, so it might be guesswork to get the right one
And my experience with Timpsons is they can copy a key that they just put it in their machine and it cuts a copy, but they can't help with anything more complex than that - I don't think they are like a traditional locksmith, they are just trained how to put a key in the copying machine and press the 'on' button.Tbh though, an entire replacement lock is less than £5 from Pinball Mania, so it might be less effort and less cost to just drill it and replace it.
You could try this - it's quite fun learning how (& far easier than I'd expected) https://www.ebay.co.uk/itm/185414999412
OP
OP
Bingo.
Cost me £5 plus postage but saved the hassle of drilling and refit.
It was indeed a Teskey A series