Spidey owners ( previous owners), I need your help

[Doggard]

I’ve owned Spidey now for a few months, I know the game well now. But one thing is confusing me.
I know how progress to a mode, completed white arrows, then put 2x on a shot, then either orbit to start mode. This works most of the time, but sometimes, like tonight, when I shoot the white arrows, and I’ve just got right ramp left to hit, that arrow on that ramp stays lit. And no matter how many times I hit that ramp, the white arrow doesn’t go out, and I can’t progress into a mode.
It’s always the right ramp, where the white arrow doesn’t go out, but it’s not all the time.
Is this right ? Or am I missing something !

 

[Wayne J]

Sounds like switch not registering on the right ramp.
Nothing else it can be.

 

[Doggard]

Thing is, I got to battle royal during that game, and also made combos off that ramp, and every jackpot was registered on that ramp, so I’m pretty sure ramp switch is ok

 

[GezTheHealer]

Have you got any solid red shots still lit while it’s on? I don’t know if they’re connected but sometimes I’ve noticed they last after a mode.. perhaps like collecting instrument bonus’s on MB. Perhaps need to finish them before starting the next mode?

 

[Monkeyboypaul]

Latest code? 2.6.x I think

 

[Doggard]

@GezTheHealer not sure about the red lights, I’ll have a look today
I’m running the last code 2.6
Ramp switch activates every time by hand, with the glass off, so it’s a bit baffling !
I’ll do some investigating today

 

[Fubar]

Doesn't the white insert stay lit to indicate that the shot has a 2X (or 3X) multiplier active?

 

[Wayne J]

@GezTheHealer not sure about the red lights, I’ll have a look today
I’m running the last code 2.6
Ramp switch activates every time by hand, with the glass off, so it’s a bit baffling !
I’ll do some investigating today

Always check switches by rolling a ball over it, rather than using your fingers. It may be that the switch arm just needs slightly bending to ensure it is triggered every time by the ball

 

[Pick Holder]

Always check switches by rolling a ball over it, rather than using your fingers. It may be that the switch arm just needs slightly bending to ensure it is triggered every time by the ball

Exactly what I was going to say.
But I would ask if you are unsure if one switch is intermediate - then just replace it. Not expensive.

 

[Doggard]

Took the ramp switch off and had a fiddle, bent the arm slightly, had a couple of games and working fine
Thanks for the pointers guys, my first pin, so still very much learning