Wanted Speaker Lights

[robertlucas1970]

Is there a good quality kit available as can only find the guy on ebay selling them at £30 and there is no picture of the parts.
My old T3 came with them and they looked nice quality with a moulded acrylic spacer that fitted behind the speaker.

Many Thanks

 

[AlanJ]

@Spadge fitted nice ones in his machines


Sent from my iPhone using Tapatalk

 

[Spadge]

Mine came from the USA might have been mezel mods or ministry of pinball (Germany) if stern. I’ll have to check, there’s different types for stern, bally-Williams etc. The stern ones you can fit a variety of inserts depending on the table and the Bally Williams ones come as a pair of large and small to fit the speakers in the display, with a variety of settings for fade, colour, pulsing and such.

I’ve got some to fit in the iron man I recently bought, along with matching inserts, which I got from pinball center.

 

[Spadge]

note the stern ones you want depend on the back box and speaker type, square or round and wood/metal back box.

 

[Monkeyboypaul]

http://www.speakerlightkits.com/

Talk to Doug, he’ll sort you out.

Have his Stern kits in 5 games, all great.

 

[kevlar]

@Sven Normansson makes the spacers, really cheap @£5/pair ( I think ). You then have to add your own LED strip ( really cheap on ebay ) and inserts ( pinball center or Sven actually makes a few of these too ). I’ve fitted quite a few pairs to sterns, both metal and wood panels, and they work well, just slightly fiddly mounting them.

 

[robertlucas1970]

Thanks for the tips, have emailed Doug, its for Sopranos, all the metal bits are in for red powder coat, so just thought I would do the speakers and that will finish it off.
Many Thanks

 

[Sgt GrizZ]

@Sven Normansson makes the spacers, really cheap @£5/pair ( I think ). You then have to add your own LED strip ( really cheap on ebay ) and inserts ( pinball center or Sven actually makes a few of these too ). I’ve fitted quite a few pairs to sterns, both metal and wood panels, and they work well, just slightly fiddly mounting them.

+1 for Phil ... he even made me some custom inserts for the Stones