Sourced: A-13901 Opto Board

[Calimori]

Another Opto Board in IJ that is looking a bit naff and this one looks like it has been over repaired before.
If anyone has one for sale in the UK let me know before I buy from overseas.

The symptom is that the opto is too weak, it works and all the other bits check out but a replacement without wires soldered onto the board would be a good start.

 

[simon]

Slight chance I have one of these as I have a box with a few various wpc opto boards in it, will look tomorrow when back in the warehouse.
Si

 

[replicas]

Put up a picture of the board Geoff and I will see if I have one knocking about.

 

[Calimori]

Here is a link to a marco remake, very similar but they appear to be now making this as a replacement for A-13901 and A-17042 as well:
http://www.marcospecialties.com/pinball-parts/A-13901
I am in no desperate rush, it just doesn't know the ball has entered the centre hole but then detects it at the next switch so pops it up into the Idol as expected.

 

[replicas]

When you get chance, ( I know you are pretty busy with the wedding and the like ) take a picture of the one on your machine. For me to refer to, the link is way different to the older stuff.
D.

 

[Calimori]

OK, I will do that on Monday/Tuesday. I can't get on the machine to play it right now, let alone fix it, all three are being played non-stop.

 

[RudeDogg1]

Looks abit like the opto sw24 pcb Andy repaired for me which is rare as hens teeth

 

[Calimori]

Nope, it is not the same board. It looks like this:

If anyone knows what the connectors and pins required are so I can sort that as well.

 

[replicas]

Geoff I have had a good look and don't have that board. But Stormy Nic has put one up for sale on the bay tonight (Sunday) might be a idea to contact him , he's on the group MUFCMUFC.
Got plenty of the molex connectors I will send you.

 

[Calimori]

Good spot, I will send him a message. Thanks.
Now the wedding is complete, I wonder what I will be spending my time on.

 

[Pudsey pinball]

Congrats Geoff .

 

[Pudsey pinball]

The board that stormy is selling looks to be the correct one looks as though the numbers tally up

 

[Pudsey pinball]

Yep defo the board you want

 

[replicas]

Good spot, I will send him a message. Thanks.
Now the wedding is complete, I wonder what I will be spending my time on.

Shagging or playing pinball would be my guess.

 

[Pudsey pinball]

Prob playing pinball

 

[replicas]

Think you might be right there Dirty Faced Dave.

 

[mufcmufc]

Didn't see this thread before listing now emailed Geoff direct