Pinball info
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
For Sale Playfield Jacks
- Thread starter SeikoKid
- Start date
Mate I’ll give em a whirl. I like stuff I’ll probably never use. Thinking they’ll come in handy on corvette to access the rear panel.
Might be worth showing a picture of them in action.
they kinda look like this when using, let you access the backend of the playfield without having to dive into the cab
Yes please.
Y/es please 
@Marvello
Hey Martin. Yes exactly as @BigIan has shown. Here in their full glory ( no hole pun intended ) and also against the market standard. ( which is a stunning product , just as you can see your squeezed in trying to lift the table and the item your trying to wedge under the playfield with 1 hand free is easier when its bigger ) . I have previously almost dropped a field trying to install the 2nd jack hence me wanting a bigger one
Just to note unless you make a small alteration, these only work on Stern - American Pinball - Spooky - or any game with either rubber feet at the bottom of the rails have a bend that slots into the rail insert he lock down bar
YOU CAN alter games that don't, like CGC for eg, by drilling a hole in the rail -shown below by my pen and fitting a 25mm rubber foot also as shown below on the stern
Regarding Bally, no experience myself here but im guessing you would need 4 ( ive shown 2 at the front and then there would be 2 at the back )
Hey Martin. Yes exactly as @BigIan has shown. Here in their full glory ( no hole pun intended ) and also against the market standard. ( which is a stunning product , just as you can see your squeezed in trying to lift the table and the item your trying to wedge under the playfield with 1 hand free is easier when its bigger ) . I have previously almost dropped a field trying to install the 2nd jack hence me wanting a bigger one
Just to note unless you make a small alteration, these only work on Stern - American Pinball - Spooky - or any game with either rubber feet at the bottom of the rails have a bend that slots into the rail insert he lock down bar
YOU CAN alter games that don't, like CGC for eg, by drilling a hole in the rail -shown below by my pen and fitting a 25mm rubber foot also as shown below on the stern
Regarding Bally, no experience myself here but im guessing you would need 4 ( ive shown 2 at the front and then there would be 2 at the back )
Attachments
Last edited:
At present PLA but I have just got me a roll of Carbon fibre and a much needed Sunlu 4 dryer
Along with the PF hole protectors I’ll take a set please