What's new
Pinball info

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

PINBALL CABIN LAYOUT

Dave Bishop

Site Supporter
10 Years
Joined
Jul 21, 2011
Messages
4,422
Location
Sidcup, Kent
So with 2 definate and another 1 possibility(THBLE)
I need to workout where I should put them. Currently the cabin looks like this
image.jpg
image.jpg
 
image.jpg

The cabin is 5.60m wide and 3.75m deep.
Thinking 7 pins along the back with a few CM in between them.
Then two either side at the front of the cabin but this will reduce the space and be quite tight AND I would have to get rid of the fridge :-(

Thoughts....
 
looks great as it is, wont covering the back door be a problem ?
Also that fridge is lovely,
 
Covering the back door will only be a problem when new pins come in. Won't be too much of a problem to move one out and then put it back again.

If only I had bought one another 1m deep then would be OK
 
It's a nice fridge. If I sell it you can have first dibs....but it won't come with contents
 
Last edited:
If you're 10cm short of getting 5 a-side, how about the stagger approach, I've had to do this, see my photo but you could do 1-back 1-forward 1-back etc.

Also ditch the fridge as you may the get another in there.

PANO_20141009_163931.jpg
 
If you get stuck for a fridge (and i wouldn't want you to be without one, with no room and all that), I can include a husky Budweiser one that fits nicely UNDER a pin as part of the negotiations... :)
 
Back
Top Bottom