Gone to Ebay Pinball 2000 computer(s) breaking for spares....

[Pick Holder]

Breaking up a Pinball 2000 computer. Has not had much use as the machine was very clean and tidy. Monitor blew so have done a conversion with NuCore/Pinbox PC and LCD monitor.

So if you need anything let me know!

 

[domlouis]

Have you got the fan?
My rfm is very noisy when it runs and I presume it must be the fan.

 

[Pick Holder]

The old computers are noisy. It is one of the reasons why I replace the old hardware.
I would never fit a 2nd hand fan. It is best to upgrade the heatsink and fan.
In fact - I would fit a new power supply as well.
I think @myPinballs will sell you what you need - and he also overhauls the computers.

 

[domlouis]

Ok thanks for the advice

 

[myPinballs]

The old computers are noisy. It is one of the reasons why I replace the old hardware.
I would never fit a 2nd hand fan. It is best to upgrade the heatsink and fan.
In fact - I would fit a new power supply as well.
I think @myPinballs will sell you what you need - and he also overhauls the computers.

Ok thanks for the advice

Yes i have all the parts for the old computer boxes, inc new fans/heatsinks and power supplies. Drop me a pm if you need some parts.

Cheers

Jim

 

[domlouis]

Jim
Will do but probably not before summer. I won't get to look at my rfm before then.
Thanks
Dom

 

[myPinballs]

Jim
Will do but probably not before summer. I won't get to look at my rfm before then.
Thanks
Dom

No worries

 

[Pick Holder]

Motherboard purchased by a pal,
PRISM card is now on ebay.....