Pin2Dmd Fireware Update pre v2.5

[crsedgar]

I need to update my Pin2DmD firmware to take advantage of these new colourizations files, I need to upgrade from v2.38 which is more involved than just dropping the update file on the SD Card.

Before I begin has anyone tried this, anything I should look out for any gotchas etc?

Cheers
Chris

 

[Pick Holder]

It depends what boardset you have. Have done loads of them but some of the board sets can be fiddly......

If you get stuck you can always send it me and I will upgrade it and return it if that helps.

Not found a definative guide that works properly. For instance pinballsp displays are a pain in the **** as you have to change drivers in your PC etc....

Feel free to PM me.

 

[Banzaipinabll]

I have 2 Pinballsp boards that I have not managed to update, as Pick Holder states, a royal pain in the backside, I have spent hours messing about with drivers with no luck, just gave up.

 

[Pick Holder]

@Banzaipinabll - well the same offer is open to you.

 

[Banzaipinabll]

I may take you up on that offer

 

[crsedgar]

Thanks @Pick Holder I really appreciate the offer, I will give it a try first. The bad news they are Pinballsp boards.

Thanks Mike

 

[Pick Holder]

I have done the ones I have owned. They are fiddly but can be done.