What's new
Pinball info

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

In Progress Party Zone - Spruce up!

gnarled112

Site Supporter
Joined
Dec 14, 2023
Messages
38
Location
Northumberland
I've owned a Bally Party Zone for ~9 months now.
Picked it up in decent condition, faded cabinet, one flipper occasionally weak.

PZ lived in my kitchen for a few months before we carried to the games room.
My house has a VERY tight U shaped staircase - so lifting this upstairs was not fun. Had to label, unplug and disassemble the entire top box.

Wanting to spruce it up - and a disclaimer, I have no idea what im doing!

So far I've:

  1. Replaced flippers
  2. Replaced flipper switches
  3. Re-soldered some loose connections
  4. Bought and (part way through) replacing some rubbers after one snapped (I bought the colourful rubbers)
  5. Applied decals
  6. sprayed exterior metals to be purple

TODO

  1. ColourDMD
  2. LED lights
  3. Buy some veneers for Captain Bizarr
  4. Debating spraying the playfield metals purple, yellow or orange.
 

Attachments

  • arrived.webp
    arrived.webp
    116.6 KB · Views: 29
  • before.webp
    before.webp
    128.8 KB · Views: 26
  • notop.webp
    notop.webp
    72.4 KB · Views: 26
  • side.webp
    side.webp
    144 KB · Views: 25
Last edited:
Cool game! Don't spray anything the ball will hit or you'll end up flakes all over your lovely playfield.
 
Back
Top Bottom