Parts for Early Bally SS needed

[pinballmania]

I’ve been tasked with assembling a kit of parts from an abandoned Kiss project.

Several parts missing starting with

Mounting Rail for sound board
Mounting bracket for display
Mounting plates for rectifier board
Surround for transformer

Let me know if you can help

Andy.

Ps. Can’t find the parts for sale/wanted section from my iPhone. Feel free to relocate thread.

 

[Pudsey pinball]

Transformer cover …is it a basket type cover?

 

[Pudsey pinball]

I got a Williams gorar spare back box with bits in any good?

 

[pinballmania]

Yes. L shaped piece with lots of holes in it.

 

[pinballmania]

I got a Williams gorar spare back box with bits in any good?

Don’t think it will be. Needs to be Bally. Thanks.

 

[Pudsey pinball]

Yes. L shaped piece with lots of holes in it.

I got one of those

 

[AlanJ]

got display mounting brackets. how many do you need @pinballmania ?

 

[stevebm1]

I might have a spare sound board mounting bracket,but I will need to check first,I once saw a cab where someone had used used plastic feet like the type used on arcade game boards to mount the board in place(obviously they had lost the brackets themselves in the past)

 

[pinballmania]

Thanks for the offers. Just need the one display mount. The transformer cover could probably be adapted to fit. I can certainly mount the sound board on stand offs if necessary but would rather have the right mounts.

Now need to add to the list a shooter trim.

 

[pinballmania]

And one of those bits of metal that goes behind the Bally flipper button.

 

[AlanJ]

i’ll post the display mount andy. shooter trim is unobtanium new. so best to reuse one if you have it, they clean and polish up good.

 

[pinballmania]

Yep. Realise the rarity of the shooter trim, but this one is really poor. Already taken off a pile of rust. If there’s a better one out there I’d be interested.

I’ve thrown most of these parts away over the years, just can’t keep it all.

 

[pinballmania]

So the Kiss project continues. Seems this really is a basket case.

The cabinet is likely not a Kiss cabinet. So the back box insert is not correct for Kiss as it’s without the Kiss feature lights and the score cut outs are not suited to Bally displays and their mounting brackets without modification.

So unless someone just happens to have a spare back box door they would let go, could someone please take a square on photo of the insert, as I’m likely going to have to make a new one.

Thanks to Alan for sending through the mounting bracket

 

[pinballmania]

 

[pinballmania]

Anyone recognise this door layout? The displays seem to originally have been attached from below.