Nut sizes

[Moorey]

Can anyone tell me the nut size that holds the plastics down on a Sega Baywatch. The nut spinner size is 1/4

 

[Asiapinball]

1/4 inch.

Do you need nuts?

Let me know how many and I can post you some.

 

[Asiapinball]

I have the posts too if you need those.

 

[Moorey]

6 nuts if poss would be nice thanks. Posts are fine.

 

[Asiapinball]

6-32 thread.

Item 6 is the post.

 

[Asiapinball]

Dm me your address and I will post in the morning.

 

[Moorey]

I thought 6/32 req 5/16 spinner

 

[Asiapinball]

I thought is seemed like too big a thread size but these are the correct nuts as they came off baywatch and they are 1/4 spinner so they will be the right ones. Maybe the manual is wrong.

 

[Moorey]

It's what confused me. If you have a post handy is the bottom thread larger than the top thread then.

 

[Asiapinball]

They are indeed 6-32 both ends.

Post on left has the usual 6-32 standard size locknuts with 5/16 spinner and on the right the reduced size baywatch locknuts with 1/4 spinner.