Found it! Leaf switch fische paper

[David_Vi]

I'm adding another stack of leaf switches to some flipper buttons to enable lane change but the flipper leafs are coil voltage so I don't want them making any contact.

I have lots of old leaf switch bits but no more fische paper.
I assume a lot of you make your own leaf switches or at least keep bits of them so maybe someone has a couple of the fische paper parts?

 

[Sgt GrizZ]

I have some . Can pop you a bit in the post

 

[David_Vi]

Damn I was expecting a piece from a leaf switch

I only need a little bit, wouldn't want to deprive you of all that

 

[Sgt GrizZ]

Damn I was expecting a piece from a leaf switch

I only need a little bit, wouldn't want to deprive you of all that

I’ll cut a bit off

 

[Sgt GrizZ]

++ On it’s way up country ++

 

[JT.]

@Jib was after some too @Sgt GrizZ , this stuff is in shorter supply than bog roll in a pandemic:

Fish paper - where to get in uk?

Haven't got my replacement node board for IMDN yet but been looking at other possible causes while I wait for delivery. Found this thread on pinside https://pinside.com/pinball/forum/topic/fixing-a-common-spike2-node-reset-issue#post-7616776 I'll inspect the wiring around/ under the flipper...

www.pinballinfo.com

 

[David_Vi]

@Jib was after some too @Sgt GrizZ , this stuff is in shorter supply than bog roll in a pandemic:

Fish paper - where to get in uk?

Haven't got my replacement node board for IMDN yet but been looking at other possible causes while I wait for delivery. Found this thread on pinside https://pinside.com/pinball/forum/topic/fixing-a-common-spike2-node-reset-issue#post-7616776 I'll inspect the wiring around/ under the flipper...

www.pinballinfo.com

Grizz is rich!

 

[Sgt GrizZ]

++ Incoming Intell ++

Price of fische paper rockets due to supply issues.

 

[David_Vi]

I'm glad I got in before the true value was apparent! Buy low, sell high!